4x108 Bolt Pattern Wheels: Fitment Guide

The 4x108 bolt pattern (4x4.25 in inches) is used by 186 vehicles in our database: Citroen C4, Ford Fiesta, Citroen C3, Alfa Romeo Spider and more.

What 4x108 Means & What Uses It

4x108 means 4 wheel studs or bolts evenly spaced on a 108 mm (4.25") circle, written 4x4.25 in inches. In the ANKUSI fitment database it appears on 186 vehicle variants from 16 makes, model years 1962–2027.

Most common makes: Citroen (60), Peugeot (36), Ford (30), Alfa Romeo (13), Opel (11), DS (7), PGO (7), Audi (6).

Popular models on 4x108: Citroen C4, Ford Fiesta, Citroen C3, Alfa Romeo Spider, Citroen DS3, Ford Ka, Ford EcoSport, Alfa Romeo Giulia.

Center bore is not the same across 4x108 vehicles: 65.1 mm (76 vehicles), 63.4 mm (21 vehicles), 57.1 mm (7 vehicles), 70.1 mm (4 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.

Typical fastener: M12x1.25 Bolt.

Every ANKUSI forged wheel can be machined to 4x108 with your vehicle's exact center bore and offset, in 14–24 inch diameters.

4x108 Forged Wheels

Forged to order in our Guangzhou factory with the 4x108 bolt pattern, your exact center bore, width and offset. From 0 per wheel.

Browse all forged wheel designs →

4x108 Vehicles We Cover (194)

Citroen

60

Peugeot

36

Ford

30

Alfa Romeo

13

Opel

11

DS

9

PGO

7

Audi

6

Vauxhall

6

Fiat

5

Tata

4

Noble

2

Jeep

1

Lancia

1

Mercury

1

Porsche

1

Saab

1

Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.

Vehicles Using 4x108 With a 65.1 mm Center Bore

In our database, 124 other vehicle entries from 11 makes use exactly the same 4x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

4x108 is used by 2.6% of the vehicle pages in our English fitment guide (171 of 6,503); 72.5% of those also use a 65.1 mm center bore.

Hub-Centric Rings for a 65.1 mm Center Bore

A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
66.1 mm66.1 → 65.1 mm
66.6 mm66.6 → 65.1 mm
67.1 mm67.1 → 65.1 mm
70.1 mm70.1 → 65.1 mm
73.1 mm73.1 → 65.1 mm

ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels

Contact WhatsApp Get a Quote