2007 Citroen Grand C4 Picasso Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Citroen Grand C4 Picasso wheels? This page gives the 2007 Citroen Grand C4 Picasso bolt pattern (4x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen Grand C4 Picasso rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Citroen Grand C4 Picasso (2007): 4x108 bolt pattern, 65.1mm center bore. Factory wheels: 16x6.5J F/R. Reference fitment ranges.

Bolt Pattern4x108
Wheel Bolt/NutM12x1.25 Bolt
Center Bore65.1mm
Wheel Load Rating900–1100 kg/wheel (Van / MPV segment reference)
Year2007
CategoryMPV

✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the Citroen Grand C4 Picasso 2007 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=citroen-grand-c4-picasso-2007&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Citroen Grand C4 Picasso 2007 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/citroen-grand-c4-picasso-2007/">Citroen Grand C4 Picasso 2007 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Citroen Grand C4 Picasso wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)16x6.5J F/R
Flush Fitment18x8.0J at ET20 offset
Maximum Aggressive19x8.5J at ET18 offset

Forged Wheel Designs for the Citroen Grand C4 Picasso

Every design below is forged to order, so it can be machined to the Citroen Grand C4 Picasso's 4x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

Minivans carry passengers and cargo across a wide range of loaded conditions, so the factory wheel spec is built around a conservative load margin. Forging lets us hold that same margin while trimming rotational mass, which shows up as smoother ride quality whether the vehicle is empty or fully loaded.

The Citroen Grand C4 Picasso runs a 4x108 bolt pattern, 65.1mm center bore, and a 16x6.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET20, which tucks the tire under the fender lip on a stock-height Citroen Grand C4 Picasso. Our Maximum Aggressive reference is 19x8.5J ET18 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Citroen Grand C4 Picasso OE Wheel Specs

The 2007 Citroen Grand C4 Picasso (MPV) uses a 4x108 bolt pattern with a 65.1mm center bore. Factory wheels are 16x6.5J F/R.

Why the factory spec works for most owners:

  • Balances ride comfort with everyday drivability
  • A commonly used size for this vehicle class, supporting parts and tire availability
  • Maintains clearance for the factory suspension and brake components
  • Provides stable, predictable handling across normal driving conditions

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen Grand C4 Picasso (2007) we drill the 4x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: 16x6.5J ET27 → ~4.81″ backspacing
  • Flush: 18x8.0J ET20 → ~5.29″ backspacing
  • Max: 19x8.5J ET18 → ~5.46″ backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen Grand C4 Picasso? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Citroen Grand C4 Picasso use?
The 2007 Citroen Grand C4 Picasso uses a 4x108 bolt pattern.
How many lug bolts does the Citroen Grand C4 Picasso use?
The Citroen Grand C4 Picasso uses a 4-lug bolt pattern (4x108), so you need a 4-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen Grand C4 Picasso?
The Citroen Grand C4 Picasso's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen Grand C4 Picasso?
Factory wheels on the Citroen Grand C4 Picasso are 16x6.5J F/R.
What is the biggest wheel size I can fit on my Citroen Grand C4 Picasso without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.5J at ET18 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen Grand C4 Picasso?
For a flush look with minimal to no rubbing, we recommend 18x8.0J at ET20 offset as a starting point on a stock or mildly lowered Citroen Grand C4 Picasso.
Do I need wheel spacers for my Citroen Grand C4 Picasso?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen Grand C4 Picasso?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.29" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen Grand C4 Picasso?
The Citroen Grand C4 Picasso runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote