Citroen OEM-Style Matte Black 10-Spoke Forged Wheels
Monoblock · Matte Black
2013 Citroen C-Elysee Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Citroen C-Elysee wheels? This page gives the 2013 Citroen C-Elysee bolt pattern (4x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen C-Elysee rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2013 Citroen C-Elysee uses a 4x108 bolt pattern with a 65.1 mm centre bore and M12x1.25 lug bolts. Factory wheels: 15x6.0J, front and rear. For aftermarket wheels, 17x7.0J ET18 sits flush and 17x7.5J ET15 is the most aggressive fit.
Forged wheels for the 2013 Citroen C-Elysee — drilled 4x108 with a 65.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Citroen C-Elysee (2013): 4x108 bolt pattern, 65.1mm center bore. Factory wheels: 15x6.0J F/R. Reference fitment ranges.
Bolt Pattern4x108
Wheel Bolt/NutM12x1.25 Bolt
Center Bore65.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2013
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 15x6.0J F/R |
| Flush Fitment | 17x7.0J at ET18 offset |
| Maximum Aggressive | 17x7.5J at ET15 offset |
Forged Wheel Designs for the Citroen C-Elysee
Every design below is forged to order, so it can be machined to the Citroen C-Elysee's 4x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Rotiform-Style Gloss White 6-Spoke Forged Wheels
Monoblock · Gloss White
BBS LM-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
BBS-Style Gold Mesh Polished Lip Forged Wheels
Monoblock · Gold
BBS-Style Gold Mesh Polished Lip 2-Piece Forged Wheels
2-Piece · Gold
Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Monoblock · Gloss White
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Citroen C-Elysee runs a 4x108 bolt pattern, 65.1mm center bore, and a 15x6.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x7.0J ET18, which tucks the tire under the fender lip on a stock-height Citroen C-Elysee. Our Maximum Aggressive reference is 17x7.5J ET15 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Citroen C-Elysee OE Wheel Specs
The 2013 Citroen C-Elysee (Sedan) uses a 4x108 bolt pattern with a 65.1mm center bore. Factory wheels are 15x6.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen C-Elysee (2013) we drill the 4x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 15x6.0J ET23 → ~4.41″ backspacing
- Flush: 17x7.0J ET18 → ~4.71″ backspacing
- Max: 17x7.5J ET15 → ~4.84″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen C-Elysee? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Citroen C-Elysee: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2013 | 4x108 | 65.1 mm | 15x6J |
| 2017 | 4x108 | 65.1 mm | 16x6J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2013–2017).
Vehicles With the Same Hub as the Citroen C-Elysee (4x108, 65.1 mm Bore)
In our database, 122 other vehicle entries from 11 makes use exactly the same 4x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x108 is used by 2.6% of the vehicle pages in our English fitment guide (171 of 6,503); 72.5% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Citroen C-Elysee use?
The 2013 Citroen C-Elysee uses a 4x108 bolt pattern.
How many lug bolts does the Citroen C-Elysee use?
The Citroen C-Elysee uses a 4-lug bolt pattern (4x108), so you need a 4-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen C-Elysee?
The Citroen C-Elysee's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen C-Elysee?
Factory wheels on the Citroen C-Elysee are 15x6.0J F/R.
What is the biggest wheel size I can fit on my Citroen C-Elysee without rubbing?
The most aggressive fitment we recommend without fender work is 17x7.5J at ET15 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen C-Elysee?
For a flush look with minimal to no rubbing, we recommend 17x7.0J at ET18 offset as a starting point on a stock or mildly lowered Citroen C-Elysee.
Do I need wheel spacers for my Citroen C-Elysee?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen C-Elysee?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 4.71" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen C-Elysee?
The Citroen C-Elysee runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 15x6 wheels · 15 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.