Land Rover Discovery Bolt Pattern, Center Bore & Wheel Offset (2015–2024)
Land Rover Discovery wheel fitment: 5x108 bolt pattern, 63.4mm center bore (2015–2024); 5x120 bolt pattern, 72.6mm center bore (2015–2021). OE wheel sizes and
- 5x108bolt pattern (PCD), most common
- 63.4 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 8 guidesmodel years 2015–2024
Bolt pattern by generation
- 5x108, 63.4 mm center bore — 2015–2024 (4 variants)
- 5x120, 72.6 mm center bore — 2015–2021 (4 variants)
Land Rover Discovery wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Land Rover Discovery Sport | 5x108 | 63.4 mm | 20x8J ET45 |
| 2021 | Land Rover Discovery | 5x120 | 72.6 mm | 21x9.5J ET41 |
| 2021 | Land Rover Discovery Sport P300e | 5x108 | 63.4 mm | 20x8J ET45 |
| 2017 | Land Rover Discovery | 5x120 | 72.6 mm | 20x8.5J ET41 |
| 2017 | Land Rover Discovery Sd4 | 5x120 | 72.6 mm | 20x8.5J ET41 |
| 2016 | Land Rover Discovery Sport Dynamic | 5x108 | 63.4 mm | 20x8J ET45 |
| 2015 | Land Rover Discovery | 5x120 | 72.6 mm | 19x8J ET53 |
| 2015 | Land Rover Discovery Sport | 5x108 | 63.4 mm | 19x8J ET45 |
Factory wheel sizes on the Land Rover Discovery
Across the 8 Land Rover Discovery trims with a documented factory wheel, the OE diameter is 19-21 inch, width 8-9.5J and offset ET41-53. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 12 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Land Rover Discovery (5x108)
Shop all Land Rover Discovery forged wheels →
Get a quote for Land Rover Discovery wheels
Vehicles With the Same Hub as the Land Rover Discovery (5x108, 63.4 mm Bore)
In our database, 256 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle entries in our database (498 of 6,503); 55.6% of those also use a 63.4 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8J | ET45 | 6.27 in (159 mm) | — | — |
| Flush | 20x9J | ET35 | 6.38 in (162 mm) | +3 mm | +23 mm |
| Maximum | 21x9J | ET30 | 6.18 in (157 mm) | −2 mm | +28 mm |
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Land Rover Discovery?
The Land Rover Discovery uses a 5x108 bolt pattern on most variants we cover with a 63.4mm center bore. Other generations use 5x120 / 72.6mm (2015–2021). Always check the exact year and trim before ordering.
What is the Land Rover Discovery center bore?
The hub-centric center bore is 63.4 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Land Rover Discovery years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Land Rover Discovery?
Any wheel drilled 5x108 with a 63.4mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.