Gloss Black Full-Face Forged Wheels
Off-Road · Gloss Black
2004 Land Rover Freelander Td4 3door Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Land Rover Freelander Td4 3door wheels? This page gives the 2004 Land Rover Freelander Td4 3door bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Land Rover Freelander Td4 3door rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2004 Land Rover Freelander Td4 3door uses a 5x114.3 bolt pattern with a 64.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 16x6J ET46. For aftermarket wheels, 17x7J ET35 sits flush.
Forged wheels for the 2004 Land Rover Freelander Td4 3door — drilled 5x114.3 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Land Rover Freelander Td4 3door (2004): 5x114.3 bolt pattern, 64.1mm center bore, OE 16x6J ET46. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore64.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2004
Category5-Lug Large Sedan/SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x6J ET46 |
| Flush Fitment | 17x7J at ET35 offset |
Forged Wheel Designs for the Land Rover Freelander Td4 3door
Every design below is forged to order, so it can be machined to the Land Rover Freelander Td4 3door's 5x114.3 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
Silver Deep Lip Full-Face Riveted Forged Wheels
Off-Road · Silver
Land Rover OEM-Style Black / Machined 5 Twin-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
Land Rover OEM-Style Gloss Black 10 Split-Spoke Forged Wheels
Replica · Gloss Black
Bronze 5-Spoke Forged Wheels
Off-Road · Bronze
Land Rover OEM-Style Brushed Silver Multi-Spoke Turbine Forged Wheels
Monoblock · Matte Silver
Fuel-Style Gunmetal Multi-Spoke Bolted Ring Off-Road Forged Wheels
Off-Road · Gunmetal
Transparent Orange / Brushed Mesh Forged Wheels
Off-Road Beadlock · Transparent Orange / Brushed
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Land Rover Freelander Td4 3door ships from the factory on a 5x114.3 bolt pattern with a 64.1mm center bore and a 16x6J ET46 wheel. Our flush reference for the Land Rover Freelander Td4 3door is 17x7J ET35.; our maximum aggressive reference is 18x8J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Land Rover Freelander Td4 3door OE Wheel Specs
The Land Rover Freelander Td4 3door ships from the factory on 5x114.3 bolt pattern wheels with a 64.1mm center bore. The stock wheel size is 16x6J ET46, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Land Rover Freelander Td4 3door (2004) we drill the 5x114.3 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6J | ET46 | 5.31 in (135 mm) | — | — |
| Flush | 17x7J | ET35 | 5.38 in (137 mm) | +2 mm | +24 mm |
| Maximum | 18x8J | ET30 | 5.68 in (144 mm) | +9 mm | +41 mm |
Vehicles With the Same Hub as the Land Rover Freelander Td4 3door (5x114.3, 64.1 mm Bore)
In our database, 36 other vehicle entries from 7 makes use exactly the same 5x114.3 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 2.8% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Land Rover Freelander Td4 3door use?
The 2004 Land Rover Freelander Td4 3door uses a 5x114.3 bolt pattern.
How many lug bolts does the Land Rover Freelander Td4 3door use?
The Land Rover Freelander Td4 3door uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Land Rover Freelander Td4 3door?
The Land Rover Freelander Td4 3door's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Land Rover Freelander Td4 3door?
Factory wheels on the Land Rover Freelander Td4 3door are 16x6J ET46.
What does a flush wheel fitment look like on the Land Rover Freelander Td4 3door?
For a flush look with minimal to no rubbing, we recommend 17x7J at ET35 offset as a starting point on a stock or mildly lowered Land Rover Freelander Td4 3door.
Do I need wheel spacers for my Land Rover Freelander Td4 3door?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Land Rover Freelander Td4 3door?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.38" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Land Rover Freelander Td4 3door?
The Land Rover Freelander Td4 3door runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x6 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.