Bright Silver 10-Spoke Machined Face Forged Wheels
Monoblock · Bright Silver
2023 Land Rover Range Rover Sport Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Land Rover Range Rover Sport wheels? This page gives the 2023 Land Rover Range Rover Sport bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Land Rover Range Rover Sport rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 Land Rover Range Rover Sport uses a 5x120 bolt pattern with a 72.6 mm centre bore and M14x1.5 lug nuts. Factory wheels: 21x9.5J at ET42. For aftermarket wheels, 22x10J ET35 sits flush and 23x10.5J ET30 is the most aggressive fit.
Forged wheels for the 2023 Land Rover Range Rover Sport — drilled 5x120 with a 72.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Land Rover Range Rover Sport (2023): 5x120 bolt pattern, 72.6mm center bore. Factory wheels: 21x9.5J. Reference fitment ranges.
Bolt Pattern5x120
Wheel Bolt/NutM14x1.5 Nut
Center Bore72.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2023
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 21x9.5J at ET42 |
| Flush Fitment | 22x10J at ET35 offset |
| Maximum Aggressive | 23x10.5J at ET30 offset |
Forged Wheel Designs for the Land Rover Range Rover Sport
Every design below is forged to order, so it can be machined to the Land Rover Range Rover Sport's 5x120 bolt pattern and 72.6 mm center bore, with the width and offset calculated for your setup.
Land Rover OEM-Style Gloss Black 8-Spoke Forged Wheels
Monoblock · Gloss Black
Orange Mesh Silver-Ring Beadlock Forged Wheels
Off-Road Beadlock · Orange
Polished Mesh Black-Ring Beadlock Forged Wheels
Off-Road Beadlock · Polished
Bradley-Style Gloss Black 5-Spoke Polished Lip Off-Road Forged Wheels
Off-Road · Gloss Black / Polished
KMC-Style Graphite Mesh Bolt Ring Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Graphite
Land Rover OEM-Style Gloss Black 5 Split Y-Spoke Forged Wheels
Off-Road · Gloss Black
Land Rover OEM-Style Matte Bronze Split Y-Spoke Mesh Forged Wheels
Monoblock · Matte Bronze
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Land Rover Range Rover Sport runs a 5x120 bolt pattern, 72.6mm center bore, and a 21x9.5J at ET42, front and rear, wheel from the factory. Our Flush Fitment reference is 22x10J ET35, which tucks the tire under the fender lip on a stock-height Land Rover Range Rover Sport. Our Maximum Aggressive reference is 23x10.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Land Rover Range Rover Sport OE Wheel Specs
The 2023 Land Rover Range Rover Sport (SUV) uses a 5x120 bolt pattern with a 72.6mm center bore. Factory wheels are 21x9.5J at ET42.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Land Rover Range Rover Sport (2023) we drill the 5x120 pattern and cut the centre bore to 72.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
Chassis: Air lowering links. Tires: 275/50 R21.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 21x9.5J ET42 → ~6.9″ backspacing
- Flush: 22x10J ET35 → ~6.88″ backspacing
- Max: 23x10.5J ET30 → ~6.93″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Land Rover spec, or want a wheel built to a custom offset for your Land Rover Range Rover Sport? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Land Rover Range Rover Sport: Specs by Model Year
Vehicles With the Same Hub as the Land Rover Range Rover Sport (5x120, 72.6 mm Bore)
In our database, 336 other vehicle entries from 10 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
Hub-Centric Rings for a 72.6 mm Center Bore
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Land Rover Range Rover Sport use?
The 2023 Land Rover Range Rover Sport uses a 5x120 bolt pattern.
How many lug bolts does the Land Rover Range Rover Sport use?
The Land Rover Range Rover Sport uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Land Rover Range Rover Sport?
The Land Rover Range Rover Sport's center bore is 72.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Land Rover Range Rover Sport?
Factory wheels on the Land Rover Range Rover Sport are 21x9.5J at ET42.
What is the biggest wheel size I can fit on my Land Rover Range Rover Sport without rubbing?
The most aggressive fitment we recommend without fender work is 23x10.5J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Land Rover Range Rover Sport?
For a flush look with minimal to no rubbing, we recommend 22x10J at ET35 offset as a starting point on a stock or mildly lowered Land Rover Range Rover Sport.
Do I need wheel spacers for my Land Rover Range Rover Sport?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Land Rover Range Rover Sport?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Land Rover Range Rover Sport?
The Land Rover Range Rover Sport runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 21x9.5 wheels · 21 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.