5x139.7 Bolt Pattern Wheels: Fitment Guide
The 5x139.7 bolt pattern (5x5.5 in inches) is used by 62 vehicles in our database: Dodge Ram, Dodge Ram 1500, Ram 1500, Chevrolet Tracker and more. Center bor
What 5x139.7 Means & What Uses It
5x139.7 means 5 wheel studs or bolts evenly spaced on a 139.7 mm (5.5") circle, written 5x5.5 in inches. In the ANKUSI fitment database it appears on 62 vehicle variants from 9 makes, model years 1940–2022.
Most common makes: Jeep (20), Dodge (19), Ram (13), Chevrolet (3), Daihatsu (2), Mitsubishi (2), Chrysler (1), Rivian (1).
Popular models on 5x139.7: Dodge Ram, Dodge Ram 1500, Ram 1500, Chevrolet Tracker, Dodge Durango, Ram 1500 Rebel, Dodge Dakota, Mitsubishi Raider.
Center bore is not the same across 5x139.7 vehicles: 77.8 mm (31 vehicles), 108 mm (5 vehicles), 108.1 mm (5 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.
Typical fastener: M12x1.5 Nut.
ANKUSI currently lists 8 forged wheel designs drilled 5x139.7, and every design can be machined to 5x139.7 with your vehicle's exact center bore and offset, in 14–24 inch diameters.
5x139.7 Vehicles We Cover (68)
Jeep
Dodge
Ram
Lada
Chevrolet
Rivian
Daihatsu
Mitsubishi
Chrysler
Suzuki
Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.
Vehicles Using 5x139.7 With a 77.8 mm Center Bore
In our database, 28 other vehicle entries from 4 makes use exactly the same 5x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x139.7 is used by 0.9% of the vehicle entries in our database (56 of 6,396); 50.0% of those also use a 77.8 mm center bore.
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels