Weld Racing-Style Black Machined Mesh Polished Deep Lip Forged Drag Racing Wheels
Drag Racing · Black Machined
2004 Dodge Ram SRT10 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Dodge Ram SRT10 wheels? This page gives the 2004 Dodge Ram SRT10 bolt pattern (5x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Dodge Ram SRT10 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Dodge Ram — styles, sizes & factory quote →
Dodge Ram SRT10 (2004): 5x139.7 bolt pattern, 77.8mm center bore. Factory wheels: F: 22x10.0J R: 22x10.0J. Reference fitment ranges.
Bolt Pattern5x139.7
Wheel Bolt/NutM12x1.5 Nut
Center Bore77.8mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Caliper TypeBrembo 6-piston fixed front monoblock caliper (OEM, SRT/Hellcat)
Year2004
CategoryPickup
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 22x10.0J R: 22x10.0J |
| Flush Fitment | 22x11.0J at ET18 offset |
| Maximum Aggressive | 22x11.5J at ET12 offset |
Forged Wheel Designs for the Dodge Ram SRT10
Every design below is forged to order, so it can be machined to the Dodge Ram SRT10's 5x139.7 bolt pattern and 77.8 mm center bore, with the width and offset calculated for your setup.
Mirror Polished 5-Spoke 3-Piece Forged Wheels
Monoblock · Mirror Polished
Dodge OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Dodge OEM-Style 2-Piece Gloss Black Y-Spoke Riveted Lip Forged Wheels
2-Piece · Gloss Black
Weld Racing-Style Gloss Black / Mirror Milled Multi-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Mirror Milled
Belak-Style Black Machined Split 5-Spoke Riveted Polished Lip Forged Drag Racing Wheels
Drag Racing · Black Machined
Weld Racing-Style Polished Concave Mesh Deep Lip Forged Drag Racing Wheels
Drag Racing · Polished
Weld Racing-Style Mirror Milled 10-Spoke Polished Deep Lip Forged Drag Racing Wheels
Drag Racing · Mirror Milled
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Trucks live and die on unsprung weight and load capacity — every pound added at the wheel is a pound the suspension has to control over every bump, fully loaded or not. Forging the wheel instead of casting it lets us hold the factory load rating while cutting rotational mass, which pays off directly in ride quality and steering response on a vehicle that spends real time towing or hauling.
The Dodge Ram SRT10 runs a 5x139.7 bolt pattern, 77.8mm center bore, and a F: 22x10.0J wheel from the factory. Our Flush Fitment reference is 22x11.0J ET18, which tucks the tire under the fender lip on a stock-height Dodge Ram SRT10. Our Maximum Aggressive reference is 22x11.5J ET12 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Dodge Ram SRT10 OE Wheel Specs
The 2004 Dodge Ram SRT10 (Pickup) uses a 5x139.7 bolt pattern with a 77.8mm center bore. Factory wheels are F: 22x10.0J R: 22x10.0J.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dodge Ram SRT10 (2004) we drill the 5x139.7 pattern and cut the centre bore to 77.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 22x10.0J ET25.4 → ~6.5″ F backspacing, R 22x10.0J ET25.4 → ~6.5″ R backspacing
- Flush: 22x11.0J ET18 → ~6.71″ backspacing
- Max: 22x11.5J ET12 → ~6.72″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dodge spec, or want a wheel built to a custom offset for your Dodge Ram SRT10? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Dodge Ram SRT10 use?
The 2004 Dodge Ram SRT10 uses a 5x139.7 bolt pattern.
How many lug bolts does the Dodge Ram SRT10 use?
The Dodge Ram SRT10 uses a 5-lug bolt pattern (5x139.7), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Dodge Ram SRT10?
The Dodge Ram SRT10's center bore is 77.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Dodge Ram SRT10?
Factory wheels on the Dodge Ram SRT10 are F: 22x10.0J R: 22x10.0J.
What is the biggest wheel size I can fit on my Dodge Ram SRT10 without rubbing?
The most aggressive fitment we recommend without fender work is 22x11.5J at ET12 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Dodge Ram SRT10?
For a flush look with minimal to no rubbing, we recommend 22x11.0J at ET18 offset as a starting point on a stock or mildly lowered Dodge Ram SRT10.
Do I need wheel spacers for my Dodge Ram SRT10?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Dodge Ram SRT10?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.71" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Dodge Ram SRT10?
The Dodge Ram SRT10 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.