Weld Racing-Style Black Machined 10-Spoke Lettered Lip Forged Drag Racing Wheels
Drag Racing · Black Machined
2009 Dodge Ram 1500 Sport Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Dodge Ram 1500 Sport wheels? This page gives the 2009 Dodge Ram 1500 Sport bolt pattern (5x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Dodge Ram 1500 Sport rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Dodge Ram 1500 — styles, sizes & factory quote →
Dodge Ram 1500 Sport (2009): 5x139.7 bolt pattern, 77.8mm center bore. Factory wheels: 20x9.0J at ET19.05 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x139.7
Wheel Bolt/NutM12x1.5 Nut
Center Bore77.8mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2009
CategoryPickup
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x9.0J F/R |
| Flush Fitment | 22x10.0J at ET20 offset |
| Maximum Aggressive | 22x11.0J at ET15 offset |
Forged Wheel Designs for the Dodge Ram 1500 Sport
Every design below is forged to order, so it can be machined to the Dodge Ram 1500 Sport's 5x139.7 bolt pattern and 77.8 mm center bore, with the width and offset calculated for your setup.
Rohana-Style Gunmetal Machined 10-Spoke Directional Forged Wheels
Monoblock · Gunmetal
Dodge OEM-Style 2-Piece Gloss Black Y-Spoke Riveted Lip Forged Wheels
2-Piece · Gloss Black
Dodge OEM-Style Gunmetal Twisted 5-Spoke Forged Wheels
Monoblock · Gunmetal
Gloss White 9-Spoke Dish Forged Wheels
Deep Dish · Gloss White
Dodge OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Gloss Black 5-Spoke Polished Lip Forged Wheels
Deep Dish · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a truck platform, wheel weight sits right at the unsprung mass budget the suspension engineers already spent on payload and towing capacity. A forged wheel keeps that budget intact — same strength, less rotational inertia — instead of eating into the margin the way a cheap cast aftermarket wheel can.
The Dodge Ram 1500 Sport runs a 5x139.7 bolt pattern, 77.8mm center bore, and a 20x9.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 22x10.0J ET20, which tucks the tire under the fender lip on a stock-height Dodge Ram 1500 Sport. Our Maximum Aggressive reference is 22x11.0J ET15 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Dodge Ram 1500 Sport OE Wheel Specs
The 2009 Dodge Ram 1500 Sport (Pickup) uses a 5x139.7 bolt pattern with a 77.8mm center bore. Factory wheels are 20x9.0J F/R.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dodge Ram 1500 Sport (2009) we drill the 5x139.7 pattern and cut the centre bore to 77.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 20x9.0J ET19.05 → ~5.75″ backspacing
- Flush: 22x10.0J ET20 → ~6.29″ backspacing
- Max: 22x11.0J ET15 → ~6.59″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dodge spec, or want a wheel built to a custom offset for your Dodge Ram 1500 Sport? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Dodge Ram 1500 Sport use?
The 2009 Dodge Ram 1500 Sport uses a 5x139.7 bolt pattern.
How many lug bolts does the Dodge Ram 1500 Sport use?
The Dodge Ram 1500 Sport uses a 5-lug bolt pattern (5x139.7), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Dodge Ram 1500 Sport?
The Dodge Ram 1500 Sport's center bore is 77.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Dodge Ram 1500 Sport?
Factory wheels on the Dodge Ram 1500 Sport are 20x9.0J F/R.
What is the biggest wheel size I can fit on my Dodge Ram 1500 Sport without rubbing?
The most aggressive fitment we recommend without fender work is 22x11.0J at ET15 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Dodge Ram 1500 Sport?
For a flush look with minimal to no rubbing, we recommend 22x10.0J at ET20 offset as a starting point on a stock or mildly lowered Dodge Ram 1500 Sport.
Do I need wheel spacers for my Dodge Ram 1500 Sport?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Dodge Ram 1500 Sport?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.29" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Dodge Ram 1500 Sport?
The Dodge Ram 1500 Sport runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.