Ram 1500 Night Package (2017) Wheel Fitment

Ram 1500 Night Package (2017): 5x139.7 bolt pattern, 77.8mm center bore, OE 20x9J ET19. Forged wheel fitment specs from ANKUSI.

Bolt Pattern5x139.7
Wheel Bolt/NutM14x1.5 Nut
Center Bore77.8mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2017
Category5-Lug Standard Sedan

Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →

Wheel Size & Offset at a Glance

Ram 1500 Night Package wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Flush Fitment20x9J at ET0 offset

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.

The Ram 1500 Night Package ships from the factory on a 5x139.7 bolt pattern with a 77.8mm center bore and a 20x9J ET19 wheel. Our flush reference for the Ram 1500 Night Package is 20x9J ET0.; our maximum aggressive reference is 22x10J ET-12. — beyond that, expect clearance issues against the fender liner without further modification.

Ram 1500 Night Package OE Wheel Specs

The Ram 1500 Night Package ships from the factory on 5x139.7 bolt pattern wheels with a 77.8mm center bore. The stock wheel size is 20x9J ET19, offering a balanced ride that suits most owners without any rubbing or clearance concerns.

Why the factory spec works for most owners:

  • Balances ride comfort with steering response and highway efficiency.
  • Wide tire and wheel availability at the factory diameter keeps replacement costs low.
  • Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
  • Guaranteed clearance against brake calipers and suspension components.

Flush Fitment

For a flush look without any body modification, most Ram 1500 Night Package owners run 20x9J ET0. This setup tucks the wheel face closer to the fender lip while staying within safe load and clearance limits.

Maximum Aggressive Fitment

Owners chasing a more aggressive stance push to 22x10J ET-12. Rough Country 2-inch leveling kit; 20x9.0J ET0 Fuel Contra wheels; 33-inch Nitto Terra Grapplers. Note: Factory blacked-out trim package on the DS platform. Clearance should be verified before ordering, especially on lowered cars.

5-Tier Configuration Options

A – Factory-Style: 20x9J ET19

Recommended setup: Factory-matched forged replacement

Economy impact: None

Best for: Daily drivers, warranty-conscious owners

Appearance 5/10 | Comfort 10/10 | Install difficulty ★☆☆☆

Estimated cost range: $$ (OE replacement)

B – Comfortable Upgrade: 20x9J ET10

Recommended setup: Direct bolt-on, factory suspension

Economy impact: Minimal

Best for: Owners who want a mild upgrade with no compromise

Appearance 6/10 | Comfort 9/10 | Install difficulty ★☆☆☆

Estimated cost range: $$ - $$$

C – Balanced / Flush Fit: 20x9J ET0

Recommended setup: Flush forged wheels, stock or mild lowering

Economy impact: Slight increase

Best for: Enthusiasts wanting a flush look daily

Appearance 8/10 | Comfort 7/10 | Install difficulty ★★☆☆

Estimated cost range: $$$

D – Aggressive: 21x9.5J ET-6

Recommended setup: Wider forged wheels, coilovers or lowering springs

Economy impact: Noticeable increase

Best for: Show-and-drive builds

Appearance 9/10 | Comfort 5/10 | Install difficulty ★★★☆

Estimated cost range: $$$$

E – Max Aggressive: 22x10J ET-12

Recommended setup: Rough Country 2-inch leveling kit; 20x9.0J ET0 Fuel Contra wheels; 33-inch Nitto Terra Grapplers. Note: Factory blacked-out trim package on the DS platform.

Economy impact: Significant increase

Best for: Show builds, weekend cars

Appearance 10/10 | Comfort 3/10 | Install difficulty ★★★★

Estimated cost range: $$$$$

Performance Comparison Matrix

Wheel SpecTier ATier BTier CTier DTier E
Wheel Spec20x9J ET1920x9J ET1020x9J ET021x9.5J ET-622x10J ET-12
Economy ImpactNoneMinimalSlight increaseNoticeable increaseSignificant increase
Appearance5/106/108/109/1010/10
Comfort10/109/107/105/103/10
Install Difficulty★☆☆☆★☆☆☆★★☆☆★★★☆★★★★
Cost Range$$ (OE replacement)$$ - $$$$$$$$$$$$$$$
Best ForDaily drivers, warranty-conscious ownersOwners who want a mild upgrade with no compromiseEnthusiasts wanting a flush look dailyShow-and-drive buildsShow builds, weekend cars

Real-World Reference Cases

The following builds are compiled from typical ANKUSI customer configurations for this platform and are illustrative, not individually verified real-world builds.

Case 1: Daily Driver (Factory-Style)

Profile: Commuter prioritizing comfort and reliability.

Setup: 20x9J ET19 forged wheels, factory suspension.

Cost: $$ (OE replacement)

Outcome: No clearance issues, factory ride quality retained.

Case 2: Balanced Enthusiast (Balanced / Flush Fit)

Profile: Weekend driver wanting a flush stance without sacrificing daily usability.

Setup: 20x9J ET0 forged wheels, mild lowering springs.

Cost: $$$

Outcome: Flush fitment with acceptable ride comfort for daily use.

Case 3: Show Build (Max Aggressive)

Profile: Show-and-shine build prioritizing stance over comfort.

Setup: 22x10J ET-12 forged wheels. Rough Country 2-inch leveling kit; 20x9.0J ET0 Fuel Contra wheels; 33-inch Nitto Terra Grapplers. Note: Factory blacked-out trim package on the DS platform.

Cost: $$$$$

Outcome: Maximum aggressive stance; clearance verified case-by-case.

Decision Guide

1. What is this car mainly used for? Daily driving favors Tier A or B; weekend/show use favors Tier D or E.
2. What is your budget? Tiers A-B keep cost low; Tiers D-E cost significantly more in wheels, tires, and possible suspension work.
3. Is fuel economy and ride comfort a priority? If yes, stay at Tier A or B; heavier, wider wheels at Tier D-E reduce efficiency and comfort.
4. Still unsure? Tier C (Balanced / Flush Fit) is the safe default for most Ram 1500 Night Package owners.

Offset & Backspacing Reference

Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.

  • OE 20x9J ET19: backspacing ≈ 5.75"
  • Flush 20x9J ET0: backspacing ≈ 5"
  • Max 22x10J ET-12: backspacing ≈ 5.03"

Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Ram 1500 Night Package.

Frequently Asked Questions

What bolt pattern (PCD) does the Ram 1500 Night Package use?
The 2017 Ram 1500 Night Package uses a 5x139.7 bolt pattern.
How many lug bolts does the Ram 1500 Night Package use?
The Ram 1500 Night Package uses a 5-lug bolt pattern (5x139.7), so you need a 5-lug forged wheel to bolt straight on.
What does a flush wheel fitment look like on the Ram 1500 Night Package?
For a flush look with minimal to no rubbing, we recommend 20x9J at ET0 offset as a starting point on a stock or mildly lowered Ram 1500 Night Package.
Do I need wheel spacers for my Ram 1500 Night Package?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ram 1500 Night Package?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ram 1500 Night Package?
The Ram 1500 Night Package runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote