5x150 Bolt Pattern Wheels: Fitment Guide
The 5x150 bolt pattern (5x5.91 in inches) is used by 17 vehicles in our database: Toyota Tundra, Toyota Land Cruiser, Toyota Sequoia, Lexus LX and more. Cente
What 5x150 Means & What Uses It
5x150 means 5 wheel studs or bolts evenly spaced on a 150 mm (5.91") circle, written 5x5.91 in inches. In the ANKUSI fitment database it appears on 17 vehicle variants from 4 makes, model years 2003–2020.
Most common makes: Toyota (13), Lexus (2), Larte Design (1), Wald (1).
Popular models on 5x150: Toyota Tundra, Toyota Land Cruiser, Toyota Sequoia, Lexus LX, Lexus LX470, Larte Design Larte Lexus, Wald Toyota Land Cruiser.
Center bore is not the same across 5x150 vehicles: 110.1 mm (15 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.
Typical fastener: M14x1.5 Nut.
ANKUSI currently lists 92 forged wheel designs drilled 5x150, and every design can be machined to 5x150 with your vehicle's exact center bore and offset, in 14–24 inch diameters.
5x150 Vehicles We Cover (19)
Toyota
Lexus
Larte Design
Wald
Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.
Vehicles Using 5x150 With a 110.1 mm Center Bore
In our database, 13 other vehicle entries from 4 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle entries in our database (13 of 6,396); 100.0% of those also use a 110.1 mm center bore.
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels