Matte Black Slotted Exposed Bolt Detail Forged Wheels
Off-Road · Matte Black
2009 Wald Toyota Land Cruiser Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Wald Toyota Land Cruiser wheels? This page gives the 2009 Wald Toyota Land Cruiser bolt pattern (5x150), centre bore, factory rim size and the offset range for aftermarket and forged Wald Toyota Land Cruiser rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2009 Wald Toyota Land Cruiser uses a 5x150 bolt pattern with a 110.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: 20x8.5J ET60. For aftermarket wheels, 22x10J ET35 sits flush.
Forged wheels for the 2009 Wald Toyota Land Cruiser — drilled 5x150 with a 110.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Wald Toyota Land Cruiser (2009): 5x150 bolt pattern, 110.1mm center bore, OE 20x8.5J ET60. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x150
Wheel Bolt/NutM14x1.5 Nut
Center Bore110.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2009
Category5-Lug Large Sedan/SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x8.5J ET60 |
| Flush Fitment | 22x10J at ET35 offset |
Forged Wheel Designs for the Wald Toyota Land Cruiser
Every design below is forged to order, so it can be machined to the Wald Toyota Land Cruiser's 5x150 bolt pattern and 110.1 mm center bore, with the width and offset calculated for your setup.
Gloss White Full-Face Forged Wheels
Off-Road · Gloss White
WK Wheels Gloss Black Red-Ring Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black / Red
TRD-Style Bronze Window Deep Lip Off-Road Forged Wheels
Off-Road · Bronze
WK-Style Gloss Black 6 X-Spoke White-Ring Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black
WK Wheels Silver Black-Ring Beadlock Forged Wheels
Off-Road Beadlock · Silver / Black
ECC Green Double-Ring Beadlock Forged Wheels
Off-Road Beadlock · Green
WK Wheels Black / Polished Beadlock Forged Wheels
Off-Road Beadlock · Black / Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Wald Toyota Land Cruiser ships from the factory on a 5x150 bolt pattern with a 110.1mm center bore and a 20x8.5J ET60 wheel. Our flush reference for the Wald Toyota Land Cruiser is 22x10J ET35.; our maximum aggressive reference is 24x10J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Wald Toyota Land Cruiser OE Wheel Specs
The Wald Toyota Land Cruiser ships from the factory on 5x150 bolt pattern wheels with a 110.1mm center bore. The stock wheel size is 20x8.5J ET60, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Wald Toyota Land Cruiser (2009) we drill the 5x150 pattern and cut the centre bore to 110.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET60 | 7.11 in (181 mm) | — | — |
| Flush | 22x10J | ET35 | 6.88 in (175 mm) | −6 mm | +44 mm |
| Maximum | 24x10J | ET30 | 6.68 in (170 mm) | −11 mm | +49 mm |
Vehicles With the Same Hub as the Wald Toyota Land Cruiser (5x150, 110.1 mm Bore)
In our database, 13 other vehicle entries from 3 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle pages in our English fitment guide (14 of 6,503); 100.0% of those also use a 110.1 mm center bore.
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Wald Toyota Land Cruiser use?
The 2009 Wald Toyota Land Cruiser uses a 5x150 bolt pattern.
How many lug bolts does the Wald Toyota Land Cruiser use?
The Wald Toyota Land Cruiser uses a 5-lug bolt pattern (5x150), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Wald Toyota Land Cruiser?
The Wald Toyota Land Cruiser's center bore is 110.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Wald Toyota Land Cruiser?
Factory wheels on the Wald Toyota Land Cruiser are 20x8.5J ET60.
What does a flush wheel fitment look like on the Wald Toyota Land Cruiser?
For a flush look with minimal to no rubbing, we recommend 22x10J at ET35 offset as a starting point on a stock or mildly lowered Wald Toyota Land Cruiser.
Do I need wheel spacers for my Wald Toyota Land Cruiser?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Wald Toyota Land Cruiser?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Wald Toyota Land Cruiser?
The Wald Toyota Land Cruiser runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.