Lexus OEM-Style Matte Black Exposed Bolt Detail Forged Wheels
Monoblock · Matte Black
2003 Lexus LX470 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lexus LX470 wheels? This page gives the 2003 Lexus LX470 bolt pattern (5x150), centre bore, factory rim size and the offset range for aftermarket and forged Lexus LX470 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2003 Lexus LX470 uses a 5x150 bolt pattern with a 110.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: 16x8.0J ET60, front and rear. For aftermarket wheels, 17x8.0J ET40 sits flush and 18x9.0J ET20 is the most aggressive fit.
Forged wheels for the 2003 Lexus LX470 — drilled 5x150 with a 110.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lexus LX470 (2003): 5x150 bolt pattern, 110.1mm center bore. Factory wheels: 16x8.0J at ET60 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x150
Wheel Bolt/NutM14x1.5 Nut
Center Bore110.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2003
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x8.0J F/R |
| Flush Fitment | 17x8.0J at ET40 offset |
| Maximum Aggressive | 18x9.0J at ET20 offset |
Forged Wheel Designs for the Lexus LX470
Every design below is forged to order, so it can be machined to the Lexus LX470's 5x150 bolt pattern and 110.1 mm center bore, with the width and offset calculated for your setup.
Lexus OEM-Style Gloss Black Mesh Forged Wheels
Monoblock · Gloss Black
Rays-Style Gloss Black 10-Spoke Forged Wheels
Monoblock · Gloss Black
Lexus OEM-Style Gunmetal 15-Spoke Forged Wheels
Monoblock · Gunmetal
Bradley-Style Gloss White 5-Spoke Off-Road Forged Wheels
Off-Road · Gloss White
Black Rhino-Style Machined Silver Multi-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Silver
Olive Green Slotted Disc Black Ring Forged Wheels
Off-Road · Olive Green
Lexus OEM-Style Bright Silver 5 Y-Spoke Windowed Ring Forged Wheels
Replica · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Lexus LX470's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Lexus LX470 runs a 5x150 bolt pattern, 110.1mm center bore, and a 16x8.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x8.0J ET40, which tucks the tire under the fender lip on a stock-height Lexus LX470. Our Maximum Aggressive reference is 18x9.0J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Lexus LX470 OE Wheel Specs
The 2003 Lexus LX470 (SUV) uses a 5x150 bolt pattern with a 110.1mm center bore. Factory wheels are 16x8.0J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lexus LX470 (2003) we drill the 5x150 pattern and cut the centre bore to 110.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, F/R 17x8.0J ET40 is a commonly used starting point — clearance must be verified on a stock or mildly lowered Lexus LX470.
Maximum Aggressive Fitment
F/R 18x9.0J ET20 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Lexus spec, or want a wheel built to a custom offset for your Lexus LX470? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x8J | ET60 | 6.86 in (174 mm) | — | — |
| Flush | 17x8J | ET40 | 6.07 in (154 mm) | −20 mm | +20 mm |
| Maximum | 18x9J | ET20 | 5.79 in (147 mm) | −27 mm | +53 mm |
Vehicles With the Same Hub as the Lexus LX470 (5x150, 110.1 mm Bore)
In our database, 13 other vehicle entries from 4 makes use exactly the same 5x150 bolt pattern and 110.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x150 is used by 0.2% of the vehicle pages in our English fitment guide (14 of 6,503); 100.0% of those also use a 110.1 mm center bore.
Hub-Centric Rings for a 110.1 mm Center Bore
A wheel with a center bore larger than 110.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 110.1 mm |
ANKUSI forged wheels are bored to exactly 110.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Lexus LX470 use?
The 2003 Lexus LX470 uses a 5x150 bolt pattern.
How many lug bolts does the Lexus LX470 use?
The Lexus LX470 uses a 5-lug bolt pattern (5x150), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lexus LX470?
The Lexus LX470's center bore is 110.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Lexus LX470?
Factory wheels on the Lexus LX470 are 16x8.0J F/R.
What is the biggest wheel size I can fit on my Lexus LX470 without rubbing?
The most aggressive fitment we recommend without fender work is 18x9.0J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Lexus LX470?
For a flush look with minimal to no rubbing, we recommend 17x8.0J at ET40 offset as a starting point on a stock or mildly lowered Lexus LX470.
Do I need wheel spacers for my Lexus LX470?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lexus LX470?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.07" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lexus LX470?
The Lexus LX470 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x8 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.