BYD OEM-Style Gloss Black 5-Spoke Forged Wheels
BYD M6 / Seal 07 Fitment · 5-Lug
BYD Wheel Fitment Guide
19 fitment guides for BYD, covering 2019 to 2026, spanning 4x100, 5x114.3, 5x120 and 6x139.7 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
BYD Bolt Pattern & Center Bore Notes
Based on the 19 BYD fitment guides we cover, we have documented 6 distinct bolt pattern / center bore combinations across different BYD platforms and model years:
- 5x120 bolt pattern, 64.1mm center bore — 8 models we cover, spanning 2019–2025.
- 5x114.3 bolt pattern, 60.1mm center bore — 3 models we cover, spanning 2023–2025.
- 4x100 bolt pattern, 54.1mm center bore — 2 models we cover, spanning 2020–2025.
- 6x139.7 bolt pattern, 106.1mm center bore — 2 models we cover, spanning 2024–2025.
- 5x114.3 bolt pattern, 64.1mm center bore — 1 model we cover, spanning 2025.
- 6x139.7 bolt pattern, 100.1mm center bore — 1 model we cover, spanning 2026.
Do not mix platforms: a wheel forged for one BYD bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your BYD model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your BYD
The most common BYD fitment in our guide is 5x120 with a 64.1 mm center bore (8 of 19 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x120 that distance is 70.5 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x120 / 64.1mm center bore
Tang (3)
Song (2)
5x114.3 / 60.1mm center bore
Dolphin (2)
4x100 / 54.1mm center bore
6x139.7 / 106.1mm center bore
5x114.3 / 64.1mm center bore
6x139.7 / 100.1mm center bore
Fangchengbao (1)
More BYD fitment guides
Forged Wheels for BYD
Forged-to-order wheel designs matched to BYD bolt patterns. Every set is machined to your exact model, offset and center bore.
Fang Cheng Bao OEM-Style Gloss Black Multi-Spoke Bolt-Ring Off-Road Forged Wheels
BYD Fangchengbao 5 / Shark Fitment · 6-Lug
BYD OEM-Style Gloss Black Riveted Mirror Milled Forged Wheels
BYD M6 / Seal 07 Fitment · 5-Lug
BYD OEM-Style Cream White Windowed Disc Forged Wheels
BYD Dolphin Mini / F3 Fitment · 4-Lug
Vehicles Using 5x120 With a 64.1 mm Center Bore
In our database, 22 other vehicle entries from 7 makes use exactly the same 5x120 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 4.3% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.