Lucid OEM-Style Gloss Black / Red 5-Spoke Aero Forged Wheels
Monoblock · Gloss Black / Red
2022 Lucid Air Grand Touring Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lucid Air Grand Touring wheels? This page gives the 2022 Lucid Air Grand Touring bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Lucid Air Grand Touring rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2022 Lucid Air Grand Touring uses a 5x120 bolt pattern with a 64.1 mm centre bore. For aftermarket wheels, 21x9J ET35 front / 21x10J ET40 rear sits flush.
Forged wheels for the 2022 Lucid Air Grand Touring — drilled 5x120 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lucid Air Grand Touring (2022): 5x120 bolt pattern, 64.1mm center bore, OE F 21x8.5J ET44 / R 21x9.5J ET51. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120
Center Bore64.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2022
Category5-Lug Performance / Tuner
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 21x9J ET35 / R 21x10J ET40 |
Forged Wheel Designs for the Lucid Air Grand Touring
Every design below is forged to order, so it can be machined to the Lucid Air Grand Touring's 5x120 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
Method-Style Matte Black Machined Bolt Ring 12-Spoke Off-Road Forged Wheels
Off-Road · Matte Black
APEX ARC-8-Style Silver Mesh Forged Wheels
Replica · Silver
Gold Mesh Deep Lip Forged Wheels
Deep Dish · Gold
APEX EC-7-Style Chrome Silver 10-Spoke Forged Wheels
Replica · Chrome Silver
APEX SM-10-Style Matte Gold 10-Spoke Forged Wheels
Replica · Matte Gold
BBS-Style Silver Mesh Deep Dish Forged Wheels
Deep Dish · Silver
Rohana-Style Bronze / Gloss Black 2-Piece Forged Wheels
2-Piece · Bronze / Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Lucid Air Grand Touring ships from the factory on a 5x120 bolt pattern with a 64.1mm center bore and a F 21x8.5J ET44 / R 21x9.5J ET51 wheel. Our flush reference for the Lucid Air Grand Touring is F 21x9J ET35 / R 21x10J ET40.; our maximum aggressive reference is F 22x9.5J ET30 / R 22x10.5J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Lucid Air Grand Touring OE Wheel Specs
The Lucid Air Grand Touring ships from the factory on 5x120 bolt pattern wheels with a 64.1mm center bore. The stock wheel size is F 21x8.5J ET44 / R 21x9.5J ET51, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lucid Air Grand Touring (2022) we drill the 5x120 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 21x8.5J | ET44 | 6.48 in (165 mm) | — | — |
| Flush | 21x9J | ET35 | 6.38 in (162 mm) | −3 mm | +15 mm |
| Maximum | 22x9.5J | ET30 | 6.43 in (163 mm) | −1 mm | +27 mm |
Vehicles With the Same Hub as the Lucid Air Grand Touring (5x120, 64.1 mm Bore)
In our database, 28 other vehicle entries from 8 makes use exactly the same 5x120 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 4.3% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Lucid Air Grand Touring use?
The 2022 Lucid Air Grand Touring uses a 5x120 bolt pattern.
How many lug bolts does the Lucid Air Grand Touring use?
The Lucid Air Grand Touring uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lucid Air Grand Touring?
The Lucid Air Grand Touring's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Lucid Air Grand Touring?
For a flush look with minimal to no rubbing, we recommend F 21x9J ET35 / R 21x10J ET40 as a starting point on a stock or mildly lowered Lucid Air Grand Touring.
Do I need wheel spacers for my Lucid Air Grand Touring?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lucid Air Grand Touring?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.38" backspacing up front and 7.07" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lucid Air Grand Touring?
Yes — the Lucid Air Grand Touring's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 21x8.5 wheels · 21 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.