BYD OEM-Style Gloss Black Riveted Mirror Milled Forged Wheels
BYD M6 / Seal 07 Fitment · 5-Lug
2022-2026 BYD Atto 3 (Yuan Plus) Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting BYD Atto 3 (Yuan Plus) wheels? This page gives the 2022-2026 BYD Atto 3 (Yuan Plus) bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged BYD Atto 3 (Yuan Plus) rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2022-2026 BYD Atto 3 (Yuan Plus) uses a 5x114.3 bolt pattern and M12x1.5 lug nuts. Factory wheels: 17x6.5J (215/60R17) or 18x7.0J (215/55R18), both at ET40, front and rear.
Forged wheels for the 2022-2026 BYD Atto 3 (Yuan Plus) — drilled 5x114.3, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
BYD Atto 3 (Yuan Plus) (2022-2026): 5x114.3 bolt pattern, 60.1 mm centre bore. 17x6.5J F/R at ET40. Aftermarket sizes confirmed on request.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore60.1mm
Wheel Load Rating920–1093 kg/wheel (Crossover segment reference)
Year2022-2026
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the BYD Atto 3 (Yuan Plus)Machined to the 5x114.3 bolt pattern · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The BYD Atto 3 (Yuan Plus) runs a 5x114.3 bolt pattern from the factory. Its centre bore is 60.1 mm, confirmed by two independent fitment references. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
BYD Atto 3 (Yuan Plus) OE Wheel Specs
The 2022-2026 BYD Atto 3 (Yuan Plus) (Electric Crossover) uses a 5x114.3 bolt pattern with a 60.1 mm centre bore. Factory wheels are available in 17x6.5J (215/60R17) or 18x7.0J (215/55R18), both at ET40, front and rear.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the BYD Atto 3 (Yuan Plus) (2022-2026) we drill the 5x114.3 pattern on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your BYD Atto 3 (Yuan Plus) directly.
Custom Forged Wheels for the BYD Atto 3 (Yuan Plus) (2022-2026)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x114.3 pattern is machined for this car specifically. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
We do not hold 5x114.3 wheels on a shelf — they are forged to order, which is why any offset, width and bore combination on this page is buildable rather than limited to a stock list.
Frequently Asked Questions
What bolt pattern (PCD) does the BYD Atto 3 (Yuan Plus) use?
The 2022-2026 BYD Atto 3 (Yuan Plus) uses a 5x114.3 bolt pattern.
What is the center bore size on the BYD Atto 3 (Yuan Plus)?
60.1 mm, confirmed by two independent fitment references. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the BYD Atto 3 (Yuan Plus)?
Factory wheels are available in 17x6.5J (215/60R17) or 18x7.0J (215/55R18), both at ET40, front and rear.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
Vehicles With the Same Hub as the BYD Atto 3 (Yuan Plus) (5x114.3, 60.1 mm Bore)
In our database, 217 other vehicle entries from 19 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 16.8% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the BYD Atto 3 (Yuan Plus)
Every design below is forged to order, so it can be machined to the BYD Atto 3 (Yuan Plus)'s 5x114.3 bolt pattern, with the width and offset calculated for your setup.
BYD OEM-Style Gloss Black 5-Spoke Forged Wheels
BYD M6 / Seal 07 Fitment · 5-Lug
Alpine OEM-Style Hyper Silver 5 Y-Spoke Forged Wheels
Alpine A290 Fitment · 5-Lug
Toyota GR Supra MkV Final Edition Forged Wheels
Gunmetal Gray 6-Spoke · 18-20in, 5×112
Nissan 370Z / GT-R Forged Wheels
Bronze Windowed Disc · 5-Lug
Tesla Model 3 / Model Y Forged Wheels
Gloss Black Double 5-Spoke
Vossen Transparent Black / Gray Brushed Full-Face Forged Wheels - Tesla Model Y / Ford Mustang Fitment (5-Lug)
Vossen-Style forged wheels featuring the transparent black / gray brushed full-face design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Rays-Style Gunmetal 5 Split-Spoke Forged Wheels
Nissan 370Z / Toyota GR86 Fitment · 5-Lug
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.