PDW Offroad-Style Matte Black 8-Spoke Orange-Ring Beadlock Off-Road Forged Wheels
Ford Bronco / Tacoma Fitment · 6-Lug
2019 Toyota Hilux Special Edition Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Toyota Hilux Special Edition wheels? This page gives the 2019 Toyota Hilux Special Edition bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Toyota Hilux Special Edition rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Toyota Hilux Special Edition (2019): 6x139.7 bolt pattern, 106.1mm center bore. Factory wheels: F/R: 18x7.5J at ET30 offset, and rear. Reference fitment ranges.
Bolt Pattern6x139.7
Wheel Bolt/NutM12x1.5 Nut
Center Bore106.1mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2019
CategoryPickup
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F/R: 18x7.5J F/R |
| Flush Fitment | 18x8.5J at ET25 offset |
| Maximum Aggressive | 20x9.0J at ET20 offset |
Forged wheels for the Toyota Hilux Special EditionMachined to the 6x139.7 bolt pattern and 106.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Payload and towing figures on a truck are engineered around a specific unsprung mass budget at each corner. Forging lets ANKUSI hit the factory strength rating for the Toyota Hilux Special Edition at a lower rotational weight than an equivalent cast wheel, which is the more meaningful upgrade on a work-capable platform than diameter alone.
The Toyota Hilux Special Edition runs a 6x139.7 bolt pattern, 106.1mm center bore, and a 18x7.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.5J ET25, which tucks the tire under the fender lip on a stock-height Toyota Hilux Special Edition. Our Maximum Aggressive reference is 20x9.0J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Toyota Hilux Special Edition OE Wheel Specs
The 2019 Toyota Hilux Special Edition (Pickup) uses a 6x139.7 bolt pattern with a 106.1mm center bore. Factory wheels are F/R: 18x7.5J F/R.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Toyota Hilux Special Edition (2019) we drill the 6x139.7 pattern and cut the centre bore to 106.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, F/R 18x8.5J ET25 is a commonly used starting point — clearance must be verified on a stock or mildly lowered Toyota Hilux Special Edition.
Maximum Aggressive Fitment
F/R 20x9.0J ET20 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Flush Fit (Conservative) 18x8.5J ET25
Recommended setup: 18x8.5J ET25 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 19x8.5J ET24
Recommended setup: 19x8.5J ET24 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced 19x9.0J ET23
Recommended setup: 19x9.0J ET23 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 20x9.0J ET21
Recommended setup: 20x9.0J ET21 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 20x9.0J ET20
Recommended setup: 20x9.0J ET20 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 18x8.5J ET25 | 19x8.5J ET24 | 19x9.0J ET23 | 20x9.0J ET21 | 20x9.0J ET20 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Flush Fit (Conservative))
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 18x8.5J ET25
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 19x9.0J ET23
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 20x9.0J ET20
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced) is the default choice for most Toyota Hilux Special Edition owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F/R: 18x7.5J ET30 → ~5.43″ backspacing
- Flush: 18x8.5J ET25 → ~5.73″ backspacing
- Max: 20x9.0J ET20 → ~5.79″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Toyota spec, or want a wheel built to a custom offset for your Toyota Hilux Special Edition? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Toyota Hilux Special Edition (2019)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 6x139.7 pattern and the 106.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Toyota orders on this platform land somewhere between the 18x8.5J ET25 flush setup and the 20x9.0J ET20 aggressive setup referenced above.
Designs we already tool for the 6x139.7 pattern — each one is re-cut to your sizes and offsets:
Black Rhino-Style Matte Black Oval-Slot Bolt Ring Off-Road Forged Wheels – Ford F-150 / Toyota Tacoma Fitment (6-Lug)
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels – Bronze 6 Y-Spoke
KMC Gloss Black 10 Y-Spoke Exposed Bolt Detail Off-Road Forged Wheels – Toyota 4Runner / Toyota Tacoma Fitment (6-Lug)
Toyota 4Runner / Tacoma Off-Road Forged Wheels – Matte Black 5-Star Dish (6-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Toyota Hilux Special Edition use?
The 2019 Toyota Hilux Special Edition uses a 6x139.7 bolt pattern.
How many lug bolts does the Toyota Hilux Special Edition use?
The Toyota Hilux Special Edition uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Toyota Hilux Special Edition?
The Toyota Hilux Special Edition's center bore is 106.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Toyota Hilux Special Edition?
Factory wheels on the Toyota Hilux Special Edition are F/R: 18x7.5J F/R.
What is the biggest wheel size I can fit on my Toyota Hilux Special Edition without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Toyota Hilux Special Edition?
For a flush look with minimal to no rubbing, we recommend 18x8.5J at ET25 offset as a starting point on a stock or mildly lowered Toyota Hilux Special Edition.
Do I need wheel spacers for my Toyota Hilux Special Edition?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Toyota Hilux Special Edition?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.73" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Toyota Hilux Special Edition?
The Toyota Hilux Special Edition runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Toyota Hilux Special Edition (6x139.7, 106.1 mm Bore)
In our database, 28 other vehicle entries from 6 makes use exactly the same 6x139.7 bolt pattern and 106.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 3.8% of the vehicle entries in our database (244 of 6,396); 11.9% of those also use a 106.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7.5J | ET30 | 5.43 in (138 mm) | — | — |
| Flush | 18x8.5J | ET25 | 5.73 in (146 mm) | +8 mm | +18 mm |
| Maximum | 20x9J | ET20 | 5.79 in (147 mm) | +9 mm | +29 mm |
Hub-Centric Rings for a 106.1 mm Center Bore
A wheel with a center bore larger than 106.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 108.1 mm | 108.1 → 106.1 mm |
| 110.1 mm | 110.1 → 106.1 mm |
| 130.1 mm | 130.1 → 106.1 mm |
ANKUSI forged wheels are bored to exactly 106.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Toyota Hilux Special Edition
Every design below is forged to order, so it can be machined to the Toyota Hilux Special Edition's 6x139.7 bolt pattern and 106.1 mm center bore, with the width and offset calculated for your setup.
Fuel Custom Finish 6 V-Spoke Exposed Bolt Detail Off-Road Forged Wheels - Toyota 4Runner / Toyota Tacoma Fitment (6-Lug)
Fuel-Style forged wheels featuring the custom finish 6 V-spoke exposed bolt detail design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels
Silver 5-Star Spoke Faux Rivet
Scorpion Bronze / Black Off-Road Deep Lip Beadlock Forged Wheels
Toyota 4Runner / Toyota Tacoma Fitment · 6-Lug
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels
Gloss Black Exposed Bolt Detail Full-Face Machined Face
Vossen-Style Matte Black 10 Y-Spoke Off-Road Forged Wheels
Toyota 4Runner / Tacoma Fitment · 6-Lug
Toyota OEM-Style Gloss Black Split Multi-Spoke Off-Road Forged Wheels
Toyota Land Cruiser / Sequoia Fitment · 6-Lug
Rays-Style Gloss Black 5-Spoke Off-Road Forged Wheels
Toyota Tacoma / Toyota 4Runner Fitment · 6-Lug
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 103-110 Nm (76-81 ft-lb). Range covers most Toyota passenger cars, crossovers, and light trucks on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.