Black / Machined Petal-Spoke Machined Face Forged Wheels
Maserati Ghibli / Levante Fitment
Maserati Wheel Fitment Guide
44 fitment guides for Maserati, covering 2003 to 2027, spanning 5x108, 5x110 and 5x114.3 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Maserati models: bolt pattern by model
Maserati Bolt Pattern & Center Bore Notes
Based on the 44 Maserati fitment guides we cover, we have documented 3 distinct bolt pattern / center bore combinations across different Maserati platforms and model years:
- 5x114.3 bolt pattern, 67.1mm center bore — 26 models we cover, spanning 2004–2026.
- 5x110 bolt pattern, 65.1mm center bore — 11 models we cover, spanning 2021–2027.
- 5x108 bolt pattern, 67.1mm center bore — 7 models we cover, spanning 2003–2006.
Do not mix platforms: a wheel forged for one Maserati bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Maserati model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Maserati
The most common Maserati fitment in our guide is 5x114.3 with a 67.1 mm center bore (26 of 44 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x114.3 that distance is 67.2 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x114.3 / 67.1mm center bore
Quattroporte (8)
2004 Maserati Quattroporte Neiman Marcus Wheels (5x114.3)2006 Maserati Quattroporte Executive GT Wheels (5x114.3)2006 Maserati Quattroporte Sport GT Wheels (5x114.3)2010 Maserati Quattroporte Sport GT S Wheels (5x114.3)2011 Maserati Quattroporte Sport GT S Awards Edition Wheels2011 Maserati Quattroporte Sport GT S MC Sport Line Wheels2019 Maserati Quattroporte Wheels: 5x114.3 Bolt Pattern2021 Maserati Quattroporte Trofeo Wheels: 5x114.3 Bolt Pattern
GranTurismo (4)
Levante (4)
Ghibli (4)
GranCabrio (3)
5x110 / 65.1mm center bore
MC20 (3)
Grecale (3)
GranCabrio (3)
5x108 / 67.1mm center bore
Spyder (3)
GranSport (3)
Forged Wheels for Maserati
Forged-to-order wheel designs matched to Maserati bolt patterns. Every set is machined to your exact model, offset and center bore.
Gunmetal Directional Milled Machined Face Forged Wheels
Maserati Ghibli / Quattroporte Fitment
Gloss Black Machined Face Forged Wheels
Maserati Ghibli / Quattroporte Fitment
Maserati OEM-Style Gloss Black 5 Y-Spoke Forged Wheels
Maserati Ghibli / Quattroporte Fitment · 5-Lug
Gloss Black 5 Y-Spoke Forged Wheels
Maserati Ghibli / Levante Fitment
Maserati OEM-Style Bright Silver 5-Star Spoke Stepped Lip Forged Wheels
Maserati Ghibli / Quattroporte Fitment · 5-Lug
Maserati OEM-Style Silver Mesh Forged Wheels
Maserati Ghibli / Quattroporte Fitment · 5-Lug
Gloss Bronze 5 V-Spoke Forged Wheels
Maserati Ghibli / Quattroporte Fitment
Vehicles Using 5x114.3 With a 67.1 mm Center Bore
In our database, 431 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.