Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
2023 Maserati Grecale Trofeo Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Maserati Grecale Trofeo wheels? This page gives the 2023 Maserati Grecale Trofeo bolt pattern (5x110), centre bore, factory rim size and the offset range for aftermarket and forged Maserati Grecale Trofeo rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 Maserati Grecale Trofeo uses a 5x110 bolt pattern with a 65.1 mm centre bore and M14x1.5 lug bolts. For aftermarket wheels, 21x9.5J ET25 front / 21x11J ET30 rear sits flush.
Forged wheels for the 2023 Maserati Grecale Trofeo — drilled 5x110 with a 65.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Maserati Grecale Trofeo (2023): 5x110 bolt pattern, 65.1mm center bore, OE F 21x9J ET35 / R 21x10.5J ET40. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x110
Wheel Bolt/NutM14x1.5 Bolt
Center Bore65.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeBrembo 4-6 piston fixed caliper, trim-dependent (OEM, Maserati Trofeo)
Year2023
Category5-Lug Large Sedan/SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 21x9.5J ET25 / R 21x11J ET30 |
Forged Wheel Designs for the Maserati Grecale Trofeo
Every design below is forged to order, so it can be machined to the Maserati Grecale Trofeo's 5x110 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Maserati OEM-Style Bright Silver 5-Star Spoke Stepped Lip Forged Wheels
Replica · Bright Silver
BBS LM-Style Silver 5 Y-Spoke Mirror Polished Forged Wheels
Replica · Silver
HRE-Style 2-Piece Satin Black 5-Spoke Riveted Lip Forged Wheels
2-Piece · Satin Black
Maserati OEM-Style Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Gloss Black Machined Face Forged Wheels
Monoblock · Gloss Black
Gunmetal Directional Milled Machined Face Forged Wheels
Monoblock · Gunmetal
Black / Machined Petal-Spoke Machined Face Forged Wheels
Monoblock · Black Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Maserati Grecale Trofeo ships from the factory on a 5x110 bolt pattern with a 65.1mm center bore and a F 21x9J ET35 / R 21x10.5J ET40 wheel. Our flush reference for the Maserati Grecale Trofeo is F 21x9.5J ET25 / R 21x11J ET30.; our maximum aggressive reference is F 22x10J ET20 / R 22x11.5J ET25. — beyond that, expect clearance issues against the fender liner without further modification.
Maserati Grecale Trofeo OE Wheel Specs
The Maserati Grecale Trofeo ships from the factory on 5x110 bolt pattern wheels with a 65.1mm center bore. The stock wheel size is F 21x9J ET35 / R 21x10.5J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Maserati Grecale Trofeo (2023) we drill the 5x110 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 21x9J | ET35 | 6.38 in (162 mm) | — | — |
| Flush | 21x9.5J | ET25 | 6.23 in (158 mm) | −4 mm | +16 mm |
| Maximum | 22x10J | ET20 | 6.29 in (160 mm) | −2 mm | +28 mm |
Vehicles With the Same Hub as the Maserati Grecale Trofeo (5x110, 65.1 mm Bore)
In our database, 139 other vehicle entries from 19 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Maserati Grecale Trofeo use?
The 2023 Maserati Grecale Trofeo uses a 5x110 bolt pattern.
How many lug bolts does the Maserati Grecale Trofeo use?
The Maserati Grecale Trofeo uses a 5-lug bolt pattern (5x110), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Maserati Grecale Trofeo?
The Maserati Grecale Trofeo's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Maserati Grecale Trofeo?
For a flush look with minimal to no rubbing, we recommend F 21x9.5J ET25 / R 21x11J ET30 as a starting point on a stock or mildly lowered Maserati Grecale Trofeo.
Do I need wheel spacers for my Maserati Grecale Trofeo?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Maserati Grecale Trofeo?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.23" backspacing up front and 7.18" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Maserati Grecale Trofeo?
Yes — the Maserati Grecale Trofeo's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 21x9 wheels · 21 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.