Maserati GranCabrio Bolt Pattern, Center Bore & Wheel Offset (2013–2027)
Maserati GranCabrio wheel fitment: 5x110 bolt pattern, 65.1mm center bore; 5x114.3 bolt pattern, 67.1mm center bore. OE wheel sizes and offsets for every Gran
- 5x110bolt pattern (PCD), most common
- 65.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2013–2027
Bolt pattern by generation
- 5x110, 65.1 mm center bore — 2027 (1 variants)
- 5x114.3, 67.1 mm center bore — 2013 (1 variants)
Maserati GranCabrio wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2027 | Maserati GranCabrio | 5x110 | 65.1 mm | — |
| 2013 | Maserati GranCabrio Sport | 5x114.3 | 67.1 mm | — |
Forged wheels for the Maserati GranCabrio (5x110)
Shop all Maserati GranCabrio forged wheels →
Get a quote for Maserati GranCabrio wheels
Vehicles With the Same Hub as the Maserati GranCabrio (5x110, 65.1 mm Bore)
In our database, 125 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.1% of the vehicle entries in our database (136 of 6,396); 100.0% of those also use a 65.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 20x9.5J | ET25 | 6.23 in (158 mm) | +3 mm | +23 mm |
| Maximum | 21x1J | ET20 | 6.29 in (160 mm) | +4 mm | +34 mm |
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Maserati GranCabrio?
The Maserati GranCabrio uses a 5x110 bolt pattern on most variants we cover with a 65.1mm center bore. Other generations use 5x114.3 / 67.1mm (2013–2013). Always check the exact year and trim before ordering.
What is the Maserati GranCabrio center bore?
The hub-centric center bore is 65.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Maserati GranCabrio years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Maserati GranCabrio?
Any wheel drilled 5x110 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.