Lincoln OEM-Style Gloss Black / Red-Milled Twin 8-Spoke Forged Wheels
Lincoln Aviator / Corsair Fitment · 5-Lug
Lincoln Wheel Fitment Guide
23 fitment guides for Lincoln, covering 2003 to 2025, spanning 5x108, 5x114.3 and 6x135 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Lincoln Bolt Pattern & Center Bore Notes
Based on the 23 Lincoln fitment guides we cover, we have documented 5 distinct bolt pattern / center bore combinations across different Lincoln platforms and model years:
- 5x108 bolt pattern, 63.4mm center bore — 9 models we cover, spanning 2013–2023.
- 5x114.3 bolt pattern, 70.5mm center bore — 5 models we cover, spanning 2003–2024.
- 6x135 bolt pattern, 87.1mm center bore — 4 models we cover, spanning 2006–2018.
- 5x114.3 bolt pattern, 67.1mm center bore — 3 models we cover, spanning 2006–2022.
- 5x114.3 bolt pattern, 63.4mm center bore — 2 models we cover, spanning 2009–2010.
Do not mix platforms: a wheel forged for one Lincoln bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Lincoln model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Lincoln
The most common Lincoln fitment in our guide is 5x108 with a 63.4 mm center bore (9 of 23 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x108 that distance is 63.5 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x108 / 63.4mm center bore
Corsair (3)
Nautilus (2)
Continental (1)
5x114.3 / 70.5mm center bore
Aviator (2)
6x135 / 87.1mm center bore
Navigator (3)
5x114.3 / 67.1mm center bore
Zephyr (2)
5x114.3 / 63.4mm center bore
Forged Wheels for Lincoln
Forged-to-order wheel designs matched to Lincoln bolt patterns. Every set is machined to your exact model, offset and center bore.
Lincoln OEM-Style Mirror Polished Dish Forged Wheels
Lincoln Continental / Corsair Fitment · 5-Lug
Lincoln OEM-Style Gloss Black Mesh Off-Road Forged Wheels
Lincoln Navigator / Mark LT Fitment · 6-Lug
Lincoln OEM-Style Chrome Slotted Disc Forged Wheels
Lincoln Continental / MKZ Fitment · 5-Lug
Lincoln Continental / Aviator Forged Wheels
Bright Silver 5 W-Spoke Side-Milled
Lincoln OEM-Style Chrome Slotted Full-Face Forged Wheels
Lincoln Continental / Nautilus Fitment · 5-Lug
Lincoln OEM-Style Black / Machined Petal Machined Face Forged Wheels
Lincoln Continental / Corsair Fitment · 5-Lug
Lincoln OEM-Style Gloss Black 5-Spoke Forged Wheels
Lincoln Continental / Corsair Fitment · 5-Lug
Vehicles Using 5x108 With a 63.4 mm Center Bore
In our database, 270 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.