Lincoln MKZ Bolt Pattern, Center Bore & Wheel Offset (2007–2020)
Lincoln MKZ wheel fitment: 5x108 bolt pattern, 63.4mm center bore (2013–2020); 5x114.3 bolt pattern, 67.1mm center bore (2007–2012). OE wheel sizes and offset
- 5x108bolt pattern (PCD), most common
- 63.4 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2007–2020
Bolt pattern by generation
- 5x108, 63.4 mm center bore — 2013–2020 (1 variants)
- 5x114.3, 67.1 mm center bore — 2007–2012 (1 variants)
Lincoln MKZ wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | Lincoln MKZ | 5x108 | 63.4 mm | 19x8.0J |
| 2012 | Lincoln MKZ | 5x114.3 | 67.1 mm | 17x7.5J ET44 |
Factory wheel sizes on the Lincoln MKZ
Across the 2 Lincoln MKZ trims with a documented factory wheel, the OE diameter is 17-19 inch, width 7.5-8J and offset ET44. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Lincoln MKZ (5x108)
Shop all Lincoln MKZ forged wheels →
Get a quote for Lincoln MKZ wheels
Vehicles With the Same Hub as the Lincoln MKZ (5x108, 63.4 mm Bore)
In our database, 268 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.6% of the vehicle entries in our database (496 of 6,503); 55.8% of those also use a 63.4 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET55 | 6.67 in (169 mm) | — | — |
| Flush | 19x8.5J | ET45 | 6.52 in (166 mm) | −4 mm | +16 mm |
| Maximum | 19x8J | ET35 | 5.88 in (149 mm) | −20 mm | +20 mm |
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Lincoln MKZ?
The Lincoln MKZ uses a 5x108 bolt pattern on most variants we cover with a 63.4mm center bore. Other generations use 5x114.3 / 67.1mm (2007–2012). Always check the exact year and trim before ordering.
What is the Lincoln MKZ center bore?
The hub-centric center bore is 63.4 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Lincoln MKZ years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Lincoln MKZ?
Any wheel drilled 5x108 with a 63.4mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.