Lincoln OEM-Style Gloss Black 5-Spoke Forged Wheels
Lincoln Continental / Corsair Fitment · 5-Lug
2023-2025 Lincoln Corsair Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lincoln Corsair wheels? This page gives the 2023-2025 Lincoln Corsair bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Lincoln Corsair rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023-2025 Lincoln Corsair uses a 5x108 bolt pattern with a 63.4 mm centre bore and M12x1.5 lug nuts. Factory wheels: 20x8.0J at ET52, front and rear.
Forged wheels for the 2023-2025 Lincoln Corsair — drilled 5x108 with a 63.4 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Lincoln Corsair (2023-2025): 5x108 bolt pattern, 63.4mm center bore. Factory wheels: 20x8.0J F/R at ET52. Aftermarket sizes confirmed on request.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.5 Nut
Center Bore63.4mm
Wheel Load Rating800–950 kg/wheel (Crossover segment reference)
Year2023-2025
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Lincoln CorsairMachined to the 5x108 bolt pattern and 63.4 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Lincoln Corsair runs a 5x108 bolt pattern with a 63.4mm center bore from the factory. We haven't yet verified real-world Flush or Maximum Aggressive offset data for this exact generation from owner communities, so ANKUSI forges to this confirmed OE specification today — or to a wider custom offset once you tell us your target tire size and stance, rather than publishing invented aftermarket numbers.
Lincoln Corsair OE Wheel Specs
The 2023-2025 Lincoln Corsair (Luxury Crossover) uses a 5x108 bolt pattern with a 63.4mm center bore. Factory wheels are 20x8.0J F/R at ET52.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lincoln Corsair (2023-2025) we drill the 5x108 pattern and cut the centre bore to 63.4mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Lincoln Corsair directly.
Custom Forged Wheels for the Lincoln Corsair (2023-2025)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x108 pattern and the 63.4mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x108 pattern — each one is re-cut to your sizes and offsets:
Lincoln OEM-Style Chrome Slotted Full-Face Forged Wheels – Lincoln Continental / Nautilus Fitment (5-Lug)
Lincoln Continental / Aviator Forged Wheels – Bright Silver 5 W-Spoke Side-Milled
Lincoln OEM-Style Black / Machined Petal Machined Face Forged Wheels – Lincoln Continental / Corsair Fitment (5-Lug)
Lincoln OEM-Style Gloss Black / Red-Milled Twin 8-Spoke Forged Wheels – Lincoln Aviator / Corsair Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Lincoln Corsair use?
The 2023-2025 Lincoln Corsair uses a 5x108 bolt pattern.
What is the center bore size on the Lincoln Corsair?
The center bore is 63.4mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Lincoln Corsair?
Factory wheels are 20x8.0J F/R at ET52.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.
Vehicles With the Same Hub as the Lincoln Corsair (5x108, 63.4 mm Bore)
In our database, 277 other vehicle entries from 17 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Lincoln Corsair: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2020 | 5x108 | 63.4 mm | 19x8J ET52 |
| 2023-2025 | 5x108 | 63.4 mm | 20x8J ET52 |
Bolt pattern and center bore stay the same across all 2 model years in our database (2020–2023).
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Lincoln Corsair
Every design below is forged to order, so it can be machined to the Lincoln Corsair's 5x108 bolt pattern and 63.4 mm center bore, with the width and offset calculated for your setup.
Lincoln OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Lincoln Continental / Aviator Fitment · 5-Lug
WF R2-Style Full Polished Silver 10-Spoke Y-Design Forged Wheels
BMW M3 CS Handschalter Fitment · 19-21in, 5x112
EKK Clear Black Tint 15-Spoke Forged Wheels
BMW M3 CS Handschalter Fitment · 19-22in, 5x112
Lincoln OEM-Style Satin Black Multi-Spoke 2-Piece Red-Rivet Floating Cap Forged Wheels
Lincoln Continental / MKZ Fitment · 5-Lug
Lincoln Continental / Aviator Forged Wheels
Matte Silver Multi-Spoke
Lincoln OEM-Style Metallic Gray Machined 20-Spoke Forged Wheels
Lincoln Continental / MKZ Fitment · 5-Lug
Lincoln OEM-Style Mirror Polished Dish Forged Wheels
Lincoln Continental / Corsair Fitment · 5-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.