Citroen OEM-Style Metallic Gray 5-Spoke Forged Wheels
Monoblock · Metallic Gray
2007 Citroen C-Crosser Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Citroen C-Crosser wheels? This page gives the 2007 Citroen C-Crosser bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Citroen C-Crosser rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007 Citroen C-Crosser uses a 5x114.3 bolt pattern with a 67.1 mm centre bore and M12x1.25 lug bolts. Factory wheels: 18x7.0J, front and rear. For aftermarket wheels, 19x8.5J ET35 sits flush and 20x9.0J ET30 is the most aggressive fit.
Forged wheels for the 2007 Citroen C-Crosser — drilled 5x114.3 with a 67.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Citroen C-Crosser (2007): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 18x7.0J F/R. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.25 Bolt
Center Bore67.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2007
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.0J F/R |
| Flush Fitment | 19x8.5J at ET35 offset |
| Maximum Aggressive | 20x9.0J at ET30 offset |
Forged Wheel Designs for the Citroen C-Crosser
Every design below is forged to order, so it can be machined to the Citroen C-Crosser's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.
Citroen OEM-Style Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Vossen HF-7-Style Brushed Silver 5 W-Spoke Side-Milled Forged Wheels
Replica · Brushed Silver
Vossen-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
Gloss Silver 5-Spoke Forged Wheels
Monoblock · Gloss Silver
BBS RI-D-Style Mirror Polished Silver 5 Y-Spoke Forged Wheels
Replica · Mirror Polished Silver
Belak-Style Black / Milled 16-Spoke Beadlock Forged Drag Racing Wheels
Drag Racing · Black Milled
Gloss Black 5-Spoke Windowed Ring Forged Wheels
Monoblock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Citroen C-Crosser runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 18x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.5J ET35, which tucks the tire under the fender lip on a stock-height Citroen C-Crosser. Our Maximum Aggressive reference is 20x9.0J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Citroen C-Crosser OE Wheel Specs
The 2007 Citroen C-Crosser (SUV) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 18x7.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen C-Crosser (2007) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x7.0J ET38 → ~5.5″ backspacing
- Flush: 19x8.5J ET35 → ~6.13″ backspacing
- Max: 20x9.0J ET30 → ~6.18″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen C-Crosser? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Citroen C-Crosser (5x114.3, 67.1 mm Bore)
In our database, 456 other vehicle entries from 30 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Citroen C-Crosser use?
The 2007 Citroen C-Crosser uses a 5x114.3 bolt pattern.
How many lug bolts does the Citroen C-Crosser use?
The Citroen C-Crosser uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen C-Crosser?
The Citroen C-Crosser's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen C-Crosser?
Factory wheels on the Citroen C-Crosser are 18x7.0J F/R.
What is the biggest wheel size I can fit on my Citroen C-Crosser without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen C-Crosser?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET35 offset as a starting point on a stock or mildly lowered Citroen C-Crosser.
Do I need wheel spacers for my Citroen C-Crosser?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen C-Crosser?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen C-Crosser?
The Citroen C-Crosser runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.