Boyd Racing-Style Gloss Black / Mirror Milled 5-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black / Mirror Milled
2007 Hamann Ferrari 599 GTB Fiorano Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Hamann Ferrari 599 GTB Fiorano wheels? This page gives the 2007 Hamann Ferrari 599 GTB Fiorano bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Hamann Ferrari 599 GTB Fiorano rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007 Hamann Ferrari 599 GTB Fiorano uses a 5x114.3 bolt pattern with a 67.1 mm centre bore and M14x1.5 lug bolts. For aftermarket wheels, 20x9J ET35 front / 21x12J ET45 rear sits flush.
Forged wheels for the 2007 Hamann Ferrari 599 GTB Fiorano — drilled 5x114.3 with a 67.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Hamann Ferrari 599 GTB Fiorano (2007): 5x114.3 bolt pattern, 67.1mm center bore, OE F 19x8J ET43 / R 20x11J ET52. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM14x1.5 Bolt
Center Bore67.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo fixed multi-piston aluminum monoblock caliper (OEM, standard across Ferrari lineup)
Year2007
Category5-Lug Standard Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9J ET35 / R 21x12J ET45 |
Forged Wheel Designs for the Hamann Ferrari 599 GTB Fiorano
Every design below is forged to order, so it can be machined to the Hamann Ferrari 599 GTB Fiorano's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.
Matte Silver Custom Forged Wheels
Monoblock · Matte Silver
Gloss Black 5-Spoke Machined Face Forged Wheels
Monoblock · Gloss Black
HRE-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
Gloss Black Machined Face Forged Wheels
Monoblock · Gloss Black
Matte Black Multi-Spoke Forged Wheels
Monoblock · Matte Black
Belak-Style Black / Milled 16-Spoke Beadlock Forged Drag Racing Wheels
Drag Racing · Black Milled
Gloss Black 5-Spoke Windowed Ring Forged Wheels
Monoblock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Hamann Ferrari 599 GTB Fiorano ships from the factory on a 5x114.3 bolt pattern with a 67.1mm center bore and a F 19x8J ET43 / R 20x11J ET52 wheel. Our flush reference for the Hamann Ferrari 599 GTB Fiorano is F 20x9J ET35 / R 21x12J ET45.; our maximum aggressive reference is F 21x9J ET30 / R 21x12.5J ET40. — beyond that, expect clearance issues against the fender liner without further modification.
Hamann Ferrari 599 GTB Fiorano OE Wheel Specs
The Hamann Ferrari 599 GTB Fiorano ships from the factory on 5x114.3 bolt pattern wheels with a 67.1mm center bore. The stock wheel size is F 19x8J ET43 / R 20x11J ET52, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Hamann Ferrari 599 GTB Fiorano (2007) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET43 | 6.19 in (157 mm) | — | — |
| Flush | 20x9J | ET35 | 6.38 in (162 mm) | +5 mm | +21 mm |
| Maximum | 21x9J | ET30 | 6.18 in (157 mm) | 0 mm | +26 mm |
Vehicles With the Same Hub as the Hamann Ferrari 599 GTB Fiorano (5x114.3, 67.1 mm Bore)
In our database, 456 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Hamann Ferrari 599 GTB Fiorano use?
The 2007 Hamann Ferrari 599 GTB Fiorano uses a 5x114.3 bolt pattern.
How many lug bolts does the Hamann Ferrari 599 GTB Fiorano use?
The Hamann Ferrari 599 GTB Fiorano uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Hamann Ferrari 599 GTB Fiorano?
The Hamann Ferrari 599 GTB Fiorano's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Hamann Ferrari 599 GTB Fiorano?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET35 / R 21x12J ET45 as a starting point on a stock or mildly lowered Hamann Ferrari 599 GTB Fiorano.
Do I need wheel spacers for my Hamann Ferrari 599 GTB Fiorano?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Hamann Ferrari 599 GTB Fiorano?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.38" backspacing up front and 8.27" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Hamann Ferrari 599 GTB Fiorano?
Yes — the Hamann Ferrari 599 GTB Fiorano's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.