
Citroen OEM-Style Matte Black 10-Spoke Forged Wheels
Monoblock · Matte Black
Fitting Citroen C1 3door wheels? This page gives the 2006 Citroen C1 3door bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Citroen C1 3door rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Citroen C1 — styles, sizes & factory quote →
Citroen C1 3door (2006): 4x100 bolt pattern, 54.1mm center bore. Factory wheels: 14x4.5J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 14x4.5J F/R |
| Flush Fitment | 15x6.0J at ET30 offset |
| Maximum Aggressive | 16x6.5J at ET28 offset |
Every design below is forged to order, so it can be machined to the Citroen C1 3door's 4x100 bolt pattern and 54.1 mm center bore, with the width and offset calculated for your setup.

Monoblock · Matte Black

Monoblock · Silver

Monoblock · Bright Silver

Monoblock · Black Machined

Monoblock · Matte Bronze

Deep Dish · Gunmetal

Monoblock · Bronze Gold

Monoblock · Gloss White
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


On a compact performance platform, every pound of rotational mass fights the car's natural agility. A forged wheel keeps strength at the factory-rated level while cutting that rotational weight, which is where the driving-feel improvement actually comes from.
The Citroen C1 3door runs a 4x100 bolt pattern, 54.1mm center bore, and a 14x4.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 15x6.0J ET30, which tucks the tire under the fender lip on a stock-height Citroen C1 3door. Our Maximum Aggressive reference is 16x6.5J ET28 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 2006 Citroen C1 3door (Hatchback) uses a 4x100 bolt pattern with a 54.1mm center bore. Factory wheels are 14x4.5J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen C1 3door (2006) we drill the 4x100 pattern and cut the centre bore to 54.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen C1 3door? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.