APEX VS-5RS-Style Gold 5 Y-Spoke Forged Wheels
Replica · Gold
2002 ABT Audi TT Sport Roadster Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting ABT Audi TT Sport Roadster wheels? This page gives the 2002 ABT Audi TT Sport Roadster bolt pattern (5x100), centre bore, factory rim size and the offset range for aftermarket and forged ABT Audi TT Sport Roadster rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2002 ABT Audi TT Sport Roadster uses a 5x100 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: 18x8.5J, front and rear. For aftermarket wheels, 19x8.5J ET25 sits flush and 19x9.0J ET20 is the most aggressive fit.
Forged wheels for the 2002 ABT Audi TT Sport Roadster — drilled 5x100 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
ABT Audi TT Sport Roadster (2002): 5x100 bolt pattern, 57.1mm center bore. Factory wheels: 18x8.5J F/R. Reference fitment ranges.
Bolt Pattern5x100
Wheel Bolt/NutM14x1.5 Bolt
Center Bore57.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2002
CategoryRoadster
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x8.5J F/R |
| Flush Fitment | 19x8.5J at ET25 offset |
| Maximum Aggressive | 19x9.0J at ET20 offset |
Forged Wheel Designs for the ABT Audi TT Sport Roadster
Every design below is forged to order, so it can be machined to the ABT Audi TT Sport Roadster's 5x100 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Rays Volk Racing TE37-Style Black Chrome 6-Spoke Forged Wheels
Replica · Black Chrome
APEX-Style Brushed Silver 10 Split-Spoke Forged Wheels
Replica · Brushed Silver
Matte Silver 12-Spoke Forged Wheels
Monoblock · Matte Silver
Rays Volk Racing TE37-Style Bronze Forged Wheels
Replica · Bronze
Advan Racing Gloss White 6-Spoke Forged Wheels
Replica · Gloss White
APEX-Style Brushed Silver 5 Y-Spoke Petal Forged Wheels
Monoblock · Brushed Silver
Rays-Style Metallic Gray 5 Y-Spoke Forged Wheels
Replica · Metallic Gray
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Convertibles lose some of the structural rigidity a fixed roof provides, which means the suspension and wheels end up doing more of the work to keep the chassis composed. A forged wheel keeps unsprung mass down without sacrificing the strength margin the factory built in — useful on a platform that's already managing extra flex.
The ABT Audi TT Sport Roadster runs a 5x100 bolt pattern, 57.1mm center bore, and a 18x8.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.5J ET25, which tucks the tire under the fender lip on a stock-height ABT Audi TT Sport Roadster. Our Maximum Aggressive reference is 19x9.0J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
ABT Audi TT Sport Roadster OE Wheel Specs
The 2002 ABT Audi TT Sport Roadster (Roadster) uses a 5x100 bolt pattern with a 57.1mm center bore. Factory wheels are 18x8.5J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the ABT Audi TT Sport Roadster (2002) we drill the 5x100 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x8.5J ET32 → ~6.01″ backspacing
- Flush: 19x8.5J ET25 → ~5.73″ backspacing
- Max: 19x9.0J ET20 → ~5.79″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact abt spec, or want a wheel built to a custom offset for your ABT Audi TT Sport Roadster? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the ABT Audi TT Sport Roadster (5x100, 57.1 mm Bore)
In our database, 85 other vehicle entries from 11 makes use exactly the same 5x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 69.4% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the ABT Audi TT Sport Roadster use?
The 2002 ABT Audi TT Sport Roadster uses a 5x100 bolt pattern.
How many lug bolts does the ABT Audi TT Sport Roadster use?
The ABT Audi TT Sport Roadster uses a 5-lug bolt pattern (5x100), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the ABT Audi TT Sport Roadster?
The ABT Audi TT Sport Roadster's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the ABT Audi TT Sport Roadster?
Factory wheels on the ABT Audi TT Sport Roadster are 18x8.5J F/R.
What is the biggest wheel size I can fit on my ABT Audi TT Sport Roadster without rubbing?
The most aggressive fitment we recommend without fender work is 19x9.0J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the ABT Audi TT Sport Roadster?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET25 offset as a starting point on a stock or mildly lowered ABT Audi TT Sport Roadster.
Do I need wheel spacers for my ABT Audi TT Sport Roadster?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my ABT Audi TT Sport Roadster?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.73" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my ABT Audi TT Sport Roadster?
The ABT Audi TT Sport Roadster runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.