Fitting Plymouth Neon wheels? This page gives the 2001 Plymouth Neon bolt pattern (5x100), centre bore, factory rim size and the offset range for aftermarket and forged Plymouth Neon rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Plymouth Neon (2001): 5x100 bolt pattern, 57.1mm center bore. Factory wheels: 14x5.5J F/R. Flush and max fitment confirmed on request.
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
On a performance-oriented coupe, the wheel is one of the few components where shaving weight has a compounding effect - less rotational mass means less work for the brakes, the drivetrain, and the chassis on every input. A forged wheel gets there without compromising the strength margin the factory engineered in.
We publish the factory specification for the Plymouth Neon below. We have not yet been able to verify aftermarket flush or maximum-aggressive offsets for this exact variant against a source we trust, so we are not listing any - an invented offset is worse than no offset when a wheel has to clear a caliper.
The 2001 Plymouth Neon (Sedan) uses a 5x100 bolt pattern with a 57.1mm center bore. Factory wheels are 14x5.5J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Plymouth Neon (2001) we drill the 5x100 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Published aftermarket fitment for this exact variant is still thin, so we have not committed to a flush or maximum-aggressive figure. Our engineering team is still collecting verified data for this variant. In the meantime the factory specification above is accurate and is the safe reference point for ordering.
What we do know: Generation PL II, model years 2000-2001. Verified against two independent fitment references.
Need a wheel for this car now? Contact ANKUSI with your target diameter, width and offset and our engineers will confirm the correct forged spec against your brake package before anything is cut. You can also use our Offset & Backspacing Calculator to work through the numbers yourself.
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x100 pattern and the 57.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x100 pattern — each one is re-cut to your sizes and offsets:
Rays-Style Gloss Black / Gunmetal 5 Y-Spoke Deep Lip Forged Wheels – Nissan 370Z / Toyota GR86 Fitment (5-Lug)
Toyota GR86 / Honda Civic Type R Forged Wheels – Gloss Black Deep Lip
Toyota GR86 / BMW 3 Series F30 Forged Wheels – Brushed Silver 7 Y-Spoke Side-Milled
APEX-Style Black / Machined 5 Split-Spoke Forged Wheels – Toyota GR86 / BMW 3 Series F30 Fitment (5-Lug)In our database, 85 other vehicle entries from 10 makes use exactly the same 5x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle entries in our database (124 of 6,503); 69.4% of those also use a 57.1 mm center bore.
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2000 | 5x100 | 57.1 mm | 14x5.5J |
| 2001 | 5x100 | 57.1 mm | 14x5.5J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2000–2001).
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 14x5.5 wheels · 14 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Every design below is forged to order, so it can be machined to the Plymouth Neon's 5x100 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Forged wheels for the Honda S2000 featuring the advan racing gloss white 5-spoke racing design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Platinum Brushed Bright Silver 5 Y-Spoke
Brushed Silver 7 Y-Spoke Side-Milled
Polished Silver 6-Spoke Deep Lip · 5-Lug
Toyota GR86 / BMW 3 Series F30 Fitment · 5-Lug
Toyota GR86 / 3 Series F30 Fitment · 5-Lug
Gloss Black 5 W-Spoke
Bright Silver Full-Face
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-10-10. Spotted an error? Email info@ankusi.com and we will verify and correct it.