Saturn Wheel Fitment Guide
12 fitment guides for Saturn, covering 2004 to 2010, spanning 5x110, 5x115 and 6x132 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Saturn Bolt Pattern & Center Bore Notes
Based on the 12 Saturn fitment guides we cover, we have documented 3 distinct bolt pattern / center bore combinations across different Saturn platforms and model years:
- 5x110 bolt pattern, 65.1mm center bore — 5 models we cover, spanning 2004–2010.
- 5x115 bolt pattern, 70.3mm center bore — 5 models we cover, spanning 2005–2010.
- 6x132 bolt pattern, 78.1mm center bore — 2 models we cover, spanning 2006–2010.
Do not mix platforms: a wheel forged for one Saturn bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Saturn model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Saturn
The most common Saturn fitment in our guide is 5x110 with a 65.1 mm center bore (5 of 12 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x110 that distance is 64.7 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x110 / 65.1mm center bore
Aura (2)
5x115 / 70.3mm center bore
Vue (5)
6x132 / 78.1mm center bore
Vehicles Using 5x110 With a 65.1 mm Center Bore
In our database, 136 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.