Ford F-150 / Chevrolet Silverado Off-Road 6-Lug Forged Wheels
Pink / Silver H-Type Spoke
2010 Saturn Outlook Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Saturn Outlook wheels? This page gives the 2010 Saturn Outlook bolt pattern (6x132), centre bore, factory rim size and the offset range for aftermarket and forged Saturn Outlook rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Saturn Outlook (2010): 6x132 bolt pattern, 78.1mm center bore. Factory wheels: 18x7.5J F/R. Flush and max fitment confirmed on request.
Bolt Pattern6x132
Wheel Bolt/NutNut
Center Bore78.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeFactory disc brakes, all four corners (OEM)
Year2010
CategorySUV
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Saturn OutlookMachined to the 6x132 bolt pattern and 78.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a vehicle this heavy, the wheel is a structural part before it is a styling part - it carries the load, the brake heat and the cornering forces all at once. A forged wheel buys back unsprung weight without giving up the load rating an SUV actually needs, which is the one number most cast aftermarket wheels quietly fall short on.
We publish the factory specification for the Saturn Outlook below. We have not yet been able to verify aftermarket flush or maximum-aggressive offsets for this exact variant against a source we trust, so we are not listing any - an invented offset is worse than no offset when a wheel has to clear a caliper.
Saturn Outlook OE Wheel Specs
The 2010 Saturn Outlook (SUV) uses a 6x132 bolt pattern with a 78.1mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Saturn Outlook (2010) we drill the 6x132 pattern and cut the centre bore to 78.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
Published aftermarket fitment for this exact variant is still thin, so we have not committed to a flush or maximum-aggressive figure. Our engineering team is still collecting verified data for this variant. In the meantime the factory specification above is accurate and is the safe reference point for ordering.
What we do know: Generation 2006 .. 2010, model years 2006-2010. Verified against two independent fitment references.
Need a wheel for this car now? Contact ANKUSI with your target diameter, width and offset and our engineers will confirm the correct forged spec against your brake package before anything is cut. You can also use our Offset & Backspacing Calculator to work through the numbers yourself.
Custom Forged Wheels for the Saturn Outlook (2010)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 6x132 pattern and the 78.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 6x132 pattern — each one is re-cut to your sizes and offsets:
Belak-Style Gloss Black 10-Spoke Beadlock Off-Road Forged Truck Racing Wheels – Chevrolet Silverado / Ford F-150 Fitment (6-Lug)
Tank 300 / 500 Off-Road 6-Lug Forged Wheels – Gloss White Custom
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels – Gloss Black 10 Y-Spoke White-Ring Exposed Bolt Detail
Toyota 4Runner / Tacoma Off-Road Forged Wheels – Gold / Black 18-Spoke Beadlock (6-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Saturn Outlook use?
The 2010 Saturn Outlook uses a 6x132 bolt pattern.
How many lug bolts does the Saturn Outlook use?
The Saturn Outlook uses a 6-lug bolt pattern (6x132), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Saturn Outlook?
The Saturn Outlook's center bore is 78.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Saturn Outlook?
Factory wheels on the Saturn Outlook are 18x7.5J F/R.
Do I need wheel spacers for my Saturn Outlook?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Saturn Outlook?
The Saturn Outlook runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Saturn Outlook (6x132, 78.1 mm Bore)
No other make in our database pairs 6x132 with a 78.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
6x132 is used by 0.2% of the vehicle entries in our database (15 of 6,503); 6.7% of those also use a 78.1 mm center bore.
Saturn Outlook: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2006 | 6x132 | 78.1 mm | 18x7.5J |
| 2010 | 6x132 | 78.1 mm | 18x7.5J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2006–2010).
Hub-Centric Rings for a 78.1 mm Center Bore
A wheel with a center bore larger than 78.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 84.1 mm | 84.1 → 78.1 mm |
| 93.1 mm | 93.1 → 78.1 mm |
| 100.1 mm | 100.1 → 78.1 mm |
| 106.1 mm | 106.1 → 78.1 mm |
ANKUSI forged wheels are bored to exactly 78.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Saturn Outlook
Every design below is forged to order, so it can be machined to the Saturn Outlook's 6x132 bolt pattern and 78.1 mm center bore, with the width and offset calculated for your setup.
Fuel Custom Finish Directional Beadlock Forged Wheels - Toyota 4Runner / Toyota Tacoma Fitment (6-Lug)
Fuel-Style forged wheels featuring the custom finish directional design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.
Black Bear Gloss Black Milled Lip Off-Road Forged Wheels - Toyota 4Runner / Toyota Tacoma Fitment (6-Lug)
Forged wheels for the Toyota 4Runner featuring the black bear gloss black milled lip design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels
Matte Black H-Type Deep Lip
Toyota 4Runner / Tacoma Off-Road 6-Lug Forged Wheels
Light Gunmetal Petal
KMC-Style Gloss Black 5-Spoke Off-Road Forged Wheels
Toyota 4Runner / Toyota Tacoma Fitment · 6-Lug
American Force Polished Multi-Spoke Wheels
Ram 1500 TRX Fitment · 20-22in, 6×139.7
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-10-10. Spotted an error? Email info@ankusi.com and we will verify and correct it.