APEX-Style Matte Bronze 8 Y-Spoke Mesh Forged Wheels
Mazda MX-5 / Honda Fit Fitment · 4-Lug
Mazda Wheel Fitment Guide
81 fitment guides for Mazda, covering 1969 to 2027, spanning 4x100, 4x114.3, 4x120, 5x114.3 and 6x139.7 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Mazda Bolt Pattern & Center Bore Notes
Based on the 83 Mazda fitment guides we cover, we have documented 8 distinct bolt pattern / center bore combinations across different Mazda platforms and model years:
- 5x114.3 bolt pattern, 67.1mm center bore — 55 models we cover, spanning 1969–2027.
- 4x100 bolt pattern, 54.1mm center bore — 19 models we cover, spanning 1989–2026.
- 5x114.3 bolt pattern, 60.1mm center bore — 2 models we cover, spanning 2025–2026.
- 4x114.3 bolt pattern, 59.6mm center bore — 1 model we cover, spanning 1973.
- 4x120 bolt pattern, 60.1mm center bore — 1 model we cover, spanning 1974.
- 5x114.3 bolt pattern, 59.6mm center bore — 1 model we cover, spanning 1991.
- 6x139.7 bolt pattern, 93.1mm center bore — 1 model we cover, spanning 2004.
- 6x139.7 bolt pattern, 100.1mm center bore — 1 model we cover, spanning 2021.
Do not mix platforms: a wheel forged for one Mazda bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Mazda model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Mazda
The most common Mazda fitment in our guide is 5x114.3 with a 67.1 mm center bore (55 of 83 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x114.3 that distance is 67.2 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
5x114.3 / 67.1mm center bore
6 (12)
2002 Mazda 6 AWD Wheels: 5x114.3 Bolt Pattern & Offset2002 Mazda 6 Sport Wheels: 5x114.3 Bolt Pattern & Offset2005 Mazda 6 Facelift Wheels: 5x114.3 Bolt Pattern & Offset2005 Mazda 6 Wagon Facelift Wheels: 5x114.3 Bolt Pattern2006 Mazda 6 MPS Wheels: 5x114.3 Bolt Pattern & Offset2008 Mazda 6 Hatchback Wheels: 5x114.3 Bolt Pattern & Offset2009 Mazda 6 SAP Wagon Wheels: 5x114.3 Bolt Pattern & Offset2009 Mazda 6 SAP Wheels: 5x114.3 Bolt Pattern & Offset2009 Mazda 6 US-spec Wheels: 5x114.3 Bolt Pattern & Offset2017 Mazda 6 Sedan Wheels: 5x114.3 Bolt Pattern & Offset2018 Mazda 6 Wagon Wheels: 5x114.3 Bolt Pattern & Offset2018 Mazda 6 Wheels: 5x114.3 Bolt Pattern, Offset & Rim Size
MX-5 (7)
2008 Mazda MX-5 Niseko Wheels: 5x114.3 Bolt Pattern & Offset2011 Mazda MX-5 Miata Special Edition Wheels (5x114.3)2012 Mazda MX-5 Kuro Wheels: 5x114.3 Bolt Pattern & Offset2013 Mazda MX-5 Roadster Coupe Wheels: 5x114.3 Bolt Pattern2013 Mazda MX-5 Sport Graphite Wheels: 5x114.3 Bolt Pattern2013 Mazda MX-5 Wheels: 5x114.3 Bolt Pattern & Offset2014 Mazda MX-5 25th Anniversary Wheels: 5x114.3 Bolt Pattern
3 (6)
2004 Mazda 3 5door Wheels: 5x114.3 Bolt Pattern & Offset2006 Mazda 3 Facelift Wheels: 5x114.3 Bolt Pattern & Offset2010 Mazda 3 i-stop Wheels: 5x114.3 Bolt Pattern & Offset2013 Mazda 3 MPS Wheels: 5x114.3 Bolt Pattern & Offset2019 Mazda 3 Sedan Wheels: 5x114.3 Bolt Pattern & Offset2019 Mazda 3 [UK] Wheels: 5x114.3 Bolt Pattern & Offset
MPV (2)
Atenza (2)
Tribute (2)
MX-30 (2)
CX-5 (2)
4x100 / 54.1mm center bore
MX-5 (8)
1989 Mazda MX-5 Miata Roadster Wheels: 4x100 Bolt Pattern1990 Mazda MX-5 1.6 (NA) Wheels: 4x100 Bolt Pattern & Offset1994 Mazda MX-5 1.8 (NA) Wheels: 4x100 Bolt Pattern & Offset2016 Mazda MX-5 Club Wheels: 4x100 Bolt Pattern & Offset2017 Mazda MX-5 RF Wheels: 4x100 Bolt Pattern & Offset2018 Mazda MX-5 RF Sport Black [UK] Wheels: 4x100 Bolt Pattern2019 Mazda MX-5 30th Anniversary Wheels: 4x100 Bolt Pattern2021 Mazda MX-5 Sport Venture Wheels: 4x100 Bolt Pattern
2 (4)
Demio (2)
5x114.3 / 60.1mm center bore
4x114.3 / 59.6mm center bore
4x120 / 60.1mm center bore
5x114.3 / 59.6mm center bore
6x139.7 / 93.1mm center bore
6x139.7 / 100.1mm center bore
More Mazda fitment guides
Forged Wheels for Mazda
Forged-to-order wheel designs matched to Mazda bolt patterns. Every set is machined to your exact model, offset and center bore.
Honda Civic / Mazda MX-5 Forged Wheels
Polished Silver 6-Spoke Deep Lip · 5-Lug
Weld Racing-Style 5-Spoke Mirror Milled Beadlock Forged Drag Racing Wheels
Honda Civic / Mazda MX-5 Miata Fitment · 4-Lug
Mazda OEM-Style Gunmetal 10-Spoke Forged Wheels
Mazda CX-60 / CX-30 Fitment · 5-Lug
OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Mazda MX-5 / Honda Fit Fitment · 4-Lug
Mazda MX-5 / 3 Forged Wheels
Bright Silver Full-Face 7-Spoke
Mazda MX-5 / 3 Forged Wheels
Chrome 10 Y-Spoke
BBS-Style Gold Mesh Polished Lip 2-Piece Forged Wheels
Mazda MX-5 / Cooper Fitment · 4-Lug
Vehicles Using 5x114.3 With a 67.1 mm Center Bore
In our database, 402 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.