Mazda 2 Bolt Pattern, Center Bore & Wheel Offset (2008–2026)
Mazda 2 wheel fitment: 4x100 bolt pattern, 54.1mm center bore (2008–2026). OE wheel sizes and offsets for every 2 variant we cover (4 guides), plus flush and
- 4x100bolt pattern (PCD)
- 54.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 4 guidesmodel years 2008–2026
Mazda 2 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Mazda 2 Hybrid | 4x100 | 54.1 mm | 16x6.0J ET45 |
| 2020 | Mazda 2 | 4x100 | 54.1 mm | — |
| 2009 | Mazda 2 3-Door | 4x100 | 54.1 mm | 15x6J ET45 |
| 2008 | Mazda 2 Sedan | 4x100 | 54.1 mm | 15x6J ET45 |
Factory wheel sizes on the Mazda 2
Across the 3 Mazda 2 trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6J and offset ET45. A forged wheel that keeps the 4x100 bolt pattern and the 54.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Mazda 2 (4x100)
Shop all Mazda 2 forged wheels →
Get a quote for Mazda 2 wheels
Vehicles With the Same Hub as the Mazda 2 (4x100, 54.1 mm Bore)
In our database, 121 other vehicle entries from 19 makes use exactly the same 4x100 bolt pattern and 54.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.7% of the vehicle entries in our database (426 of 6,396); 32.9% of those also use a 54.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6J | ET45 | 5.27 in (134 mm) | — | — |
| Maximum | 18x7.5J | ET35 | 5.63 in (143 mm) | +9 mm | +29 mm |
Hub-Centric Rings for a 54.1 mm Center Bore
A wheel with a center bore larger than 54.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 56.1 mm | 56.1 → 54.1 mm |
| 57.1 mm | 57.1 → 54.1 mm |
| 60.1 mm | 60.1 → 54.1 mm |
| 63.4 mm | 63.4 → 54.1 mm |
| 73.1 mm | 73.1 → 54.1 mm |
ANKUSI forged wheels are bored to exactly 54.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Mazda 2?
The Mazda 2 uses a 4x100 bolt pattern with a 54.1mm center bore across every 2 variant in our database (4 guides, 2008–2026).
What is the Mazda 2 center bore?
The hub-centric center bore is 54.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Mazda 2 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Mazda 2?
Any wheel drilled 4x100 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.