Dodge Charger Bolt Pattern, Center Bore & Wheel Offset (2006–2026)
Dodge Charger wheel fitment: 5x115 bolt pattern, 71.5mm center bore (2006–2021); 5x127 bolt pattern, 71.6mm center bore.
- 5x115bolt pattern (PCD), most common
- 71.5 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 17 guidesmodel years 2006–2026
Bolt pattern by generation
- 5x115, 71.5 mm center bore — 2006–2021 (14 variants)
- 5x127, 71.6 mm center bore — 2026 (3 variants)
Dodge Charger wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Charger Sedan SIXPACK | 5x127 | 71.6 mm | 20x9.0J ET24 |
| 2026 | Dodge Charger Scat Pack SIXPACK | 5x127 | 71.6 mm | 20x10.0J |
| 2026 | Dodge Charger Sedan SIXPACK | 5x127 | 71.6 mm | 20x9.0J |
| 2021 | Dodge Charger SRT Hellcat Redeye | 5x115 | 71.5 mm | 20x11.0J |
| 2020 | Dodge Charger SRT Hellcat Widebody | 5x115 | 71.5 mm | 20x11.0J |
| 2020 | Dodge Charger Scat Pack Widebody | 5x115 | 71.5 mm | 20x11.0J |
| 2019 | Dodge Charger SRT Hellcat | 5x115 | 71.5 mm | 20x9.5J |
| 2015 | Dodge Charger | 5x115 | 71.5 mm | 18x7.5J |
| 2015 | Dodge Charger SRT Hellcat | 5x115 | 71.5 mm | 20x9.5J |
| 2014 | Dodge Charger 100th Anniversary Edition | 5x115 | 71.5 mm | 20x8.0J |
| 2014 | Dodge Charger Scat Package | 5x115 | 71.5 mm | 20x8.0J |
| 2013 | Dodge Charger SRT8 392 | 5x115 | 71.5 mm | 20x9.0J |
| 2012 | Dodge Charger SRT8 | 5x115 | 71.5 mm | 20x9.0J |
| 2012 | Dodge Charger SRT8 Super Bee | 5x115 | 71.5 mm | 20x9.0J |
| 2011 | Dodge Charger | 5x115 | 71.5 mm | 17x7.0J |
| 2007 | Dodge Charger SRT8 Super Bee | 5x115 | 71.5 mm | 20x9.0J |
| 2006 | Dodge Charger SRT8 | 5x115 | 71.5 mm | 20x9.0J |
Factory wheel sizes on the Dodge Charger
Across the 17 Dodge Charger trims with a documented factory wheel, the OE diameter is 17-20 inch, width 7-11J and offset ET24. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Dodge Charger (5x115)
Shop all Dodge Charger forged wheels →
Get a quote for Dodge Charger wheels
Vehicles With the Same Hub as the Dodge Charger (5x115, 71.5 mm Bore)
In our database, 21 other vehicle entries from 4 makes use exactly the same 5x115 bolt pattern and 71.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 33.5% of those also use a 71.5 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x11J | ET24 | 6.94 in (176 mm) | — | — |
| Flush | 20x11.5J | ET18 | 6.96 in (177 mm) | 0 mm | +12 mm |
| Maximum | 20x12J | ET15 | 7.09 in (180 mm) | +4 mm | +22 mm |
Hub-Centric Rings for a 71.5 mm Center Bore
A wheel with a center bore larger than 71.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 71.6 mm | 71.6 → 71.5 mm |
| 72.6 mm | 72.6 → 71.5 mm |
| 73.1 mm | 73.1 → 71.5 mm |
| 74.1 mm | 74.1 → 71.5 mm |
ANKUSI forged wheels are bored to exactly 71.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Dodge Charger?
The Dodge Charger uses a 5x115 bolt pattern on most variants we cover with a 71.5mm center bore. Other generations use 5x127 / 71.6mm (2026–2026). Always check the exact year and trim before ordering.
What is the Dodge Charger center bore?
The hub-centric center bore is 71.5 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Dodge Charger years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Dodge Charger?
Any wheel drilled 5x115 with a 71.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.



