Gloss Black Machined 10-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
2007 Dodge Charger SRT8 Super Bee Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Dodge Charger SRT8 Super Bee wheels? This page gives the 2007 Dodge Charger SRT8 Super Bee bolt pattern (5x115), centre bore, factory rim size and the offset range for aftermarket and forged Dodge Charger SRT8 Super Bee rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Dodge Charger — styles, sizes & factory quote →
Dodge Charger SRT8 Super Bee (2007): 5x115 bolt pattern, 71.5mm center bore. Factory wheels: F: 20x9.0J R: 20x9.5J. Reference fitment ranges.
Bolt Pattern5x115
Wheel Bolt/NutM14x1.5 Nut
Center Bore71.5mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo 6-piston fixed front monoblock caliper (OEM, SRT/Hellcat)
Year2007
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 20x9.0J R: 20x9.5J |
| Flush Fitment | F 20x9.5J ET22 / R 20x10.5J ET20 |
| Maximum Aggressive | F 20x10.0J ET18 / R 20x11.0J ET15 |
Forged Wheel Designs for the Dodge Charger SRT8 Super Bee
Every design below is forged to order, so it can be machined to the Dodge Charger SRT8 Super Bee's 5x115 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Dodge OEM-Style Gloss Black Directional Milled Forged Wheels
Monoblock · Gloss Black
Dodge OEM-Style 2-Piece Gloss Black Y-Spoke Riveted Lip Forged Wheels
2-Piece · Gloss Black
Dodge OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Weld Racing-Style Gloss Black / Machined 5-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
Belak-Style Gloss Black / Machined 5 Split-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
Weld Racing-Style Mirror Milled 10-Spoke Polished Deep Lip Forged Drag Racing Wheels
Drag Racing · Mirror Milled
Weld Racing-Style Polished Concave Mesh Deep Lip Forged Drag Racing Wheels
Drag Racing · Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Dodge Charger SRT8 Super Bee runs a 5x115 bolt pattern, 71.5mm center bore, and a F: 20x9.0J wheel from the factory. Our Flush Fitment reference is F 20x9.5J ET22 / R 20x10.5J ET20, which tucks the tire under the fender lip on a stock-height Dodge Charger SRT8 Super Bee. Our Maximum Aggressive reference is F 20x10.0J ET18 / R 20x11.0J ET15 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Dodge Charger SRT8 Super Bee OE Wheel Specs
The 2007 Dodge Charger SRT8 Super Bee (Sedan) uses a 5x115 bolt pattern with a 71.5mm center bore. Factory wheels are F: 20x9.0J R: 20x9.5J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dodge Charger SRT8 Super Bee (2007) we drill the 5x115 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 20x9.0J ET24 → ~5.94″ F backspacing, R 20x9.5J ET24 → ~6.19″ R backspacing
- Flush: F 20x9.5J ET22 → ~6.12″ F backspacing, R 20x10.5J ET20 → ~6.54″ R backspacing
- Max: F 20x10.0J ET18 → ~6.21″ F backspacing, R 20x11.0J ET15 → ~6.59″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dodge spec, or want a wheel built to a custom offset for your Dodge Charger SRT8 Super Bee? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Dodge Charger SRT8 Super Bee use?
The 2007 Dodge Charger SRT8 Super Bee uses a 5x115 bolt pattern.
How many lug bolts does the Dodge Charger SRT8 Super Bee use?
The Dodge Charger SRT8 Super Bee uses a 5-lug bolt pattern (5x115), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Dodge Charger SRT8 Super Bee?
The Dodge Charger SRT8 Super Bee's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Dodge Charger SRT8 Super Bee?
Factory wheels on the Dodge Charger SRT8 Super Bee are F: 20x9.0J R: 20x9.5J.
What is the biggest wheel size I can fit on my Dodge Charger SRT8 Super Bee without rubbing?
The most aggressive fitment we recommend without fender work is F 20x10.0J ET18 / R 20x11.0J ET15. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Dodge Charger SRT8 Super Bee?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET22 / R 20x10.5J ET20 as a starting point on a stock or mildly lowered Dodge Charger SRT8 Super Bee.
Do I need wheel spacers for my Dodge Charger SRT8 Super Bee?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Dodge Charger SRT8 Super Bee?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.12" backspacing up front and 6.54" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Dodge Charger SRT8 Super Bee?
Yes — the Dodge Charger SRT8 Super Bee's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.