HRE P101-Style Bright Silver / Silver 5 W-Spoke Forged Wheels
Replica · Bright Silver / Silver
2025 Lamborghini Temerario Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lamborghini Temerario wheels? This page gives the 2025 Lamborghini Temerario bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Lamborghini Temerario rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Lamborghini Temerario uses a 5x112 bolt pattern and M14x1.5 lug bolts.
Forged wheels for the 2025 Lamborghini Temerario — drilled 5x112, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lamborghini Temerario (2025): 5x112 bolt pattern, centre bore pending verification, OE F 20x9J ET40 / R 21x11.5J ET50. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Bolt
Center BorePending verification
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Caliper TypeBrembo fixed multi-piston caliper (OEM, standard across Lamborghini lineup)
Year2025
Category5-Lug Supercar (2-Piece)
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9.5J ET35 / R 21x12J ET45 |
Forged Wheel Designs for the Lamborghini Temerario
Every design below is forged to order, so it can be machined to the Lamborghini Temerario's 5x112 bolt pattern, with the width and offset calculated for your setup.
Lamborghini OEM-Style Gloss Black Mesh Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Black / Machined 5 Y-Spoke Forged Wheels
Monoblock · Black Machined
Chrome 5 Split-Spoke Forged Wheels
Monoblock · Chrome
Lamborghini OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Bright Silver 6-Spoke Forged Wheels
Monoblock · Bright Silver
HRE Performance P101-Style Bright Silver 15-Spoke Forged Wheels
Replica · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a supercar, wheel weight is one of the few remaining places to cut rotational mass without touching the powertrain or chassis the factory already optimized. Forging gets there at the same structural margin as the OE wheel, which is exactly the trade a car built around outright performance rewards.
The Lamborghini Temerario ships from the factory on a 5x112 bolt pattern with a, centre bore pending verification and a F 20x9J ET40 / R 21x11.5J ET50 wheel. Our flush reference for the Lamborghini Temerario is F 20x9.5J ET35 / R 21x12J ET45.; our maximum aggressive reference is F 21x9.5J ET30 / R 22x12.5J ET40. — beyond that, expect clearance issues against the fender liner without further modification.
Lamborghini Temerario OE Wheel Specs
Verification notice (2026-09-19): the centre bore previously listed for this vehicle (66.5 mm) could not be confirmed by two independent references, so it has been withdrawn until verified. The bolt pattern shown has been confirmed.
The Lamborghini Temerario ships from the factory on 5x112 bolt pattern wheels with a, centre bore pending verification. The stock wheel size is F 20x9J ET40 / R 21x11.5J ET50, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lamborghini Temerario (2025) we drill the 5x112 pattern on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x9J | ET40 | 6.57 in (167 mm) | — | — |
| Flush | 20x9.5J | ET35 | 6.63 in (168 mm) | +1 mm | +11 mm |
| Maximum | 21x9.5J | ET30 | 6.43 in (163 mm) | −4 mm | +16 mm |
Frequently Asked Questions
What bolt pattern (PCD) does the Lamborghini Temerario use?
The 2025 Lamborghini Temerario uses a 5x112 bolt pattern.
How many lug bolts does the Lamborghini Temerario use?
The Lamborghini Temerario uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What does a flush wheel fitment look like on the Lamborghini Temerario?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET35 / R 21x12J ET45 as a starting point on a stock or mildly lowered Lamborghini Temerario.
Do I need wheel spacers for my Lamborghini Temerario?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lamborghini Temerario?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.63" backspacing up front and 8.27" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lamborghini Temerario?
Yes — the Lamborghini Temerario's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x9 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.