
Vossen Bronze Gold / Bronze 5 W-Spoke Forged Wheels
Replica · Bronze Gold / Bronze
Fitting Dacia Duster Hybrid-G 150 4x4 wheels? This page gives the 2026 Dacia Duster Hybrid-G 150 4x4 bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Dacia Duster Hybrid-G 150 4x4 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Dacia Duster Hybrid-G 150 4x4 (2026): 5x114.3 bolt pattern, 66.1mm center bore. Factory wheels: 18x7.0J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.0J F/R |
| Flush Fitment | 19x8.0J at ET40 offset |
| Maximum Aggressive | 20x8.5J at ET38 offset |
Every design below is forged to order, so it can be machined to the Dacia Duster Hybrid-G 150 4x4's 5x114.3 bolt pattern and 66.1 mm center bore, with the width and offset calculated for your setup.

Replica · Bronze Gold / Bronze

Replica · Chrome

Monoblock · Brushed Silver

Replica · Brushed Silver

Replica · Gloss Black / Gunmetal

Monoblock · Gloss White

Replica · Gray

Replica · Transparent Black
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


The Dacia Duster Hybrid-G 150 4x4's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Dacia Duster Hybrid-G 150 4x4 runs a 5x114.3 bolt pattern, 66.1mm center bore, and a 18x7.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.0J ET40, which tucks the tire under the fender lip on a stock-height Dacia Duster Hybrid-G 150 4x4. Our Maximum Aggressive reference is 20x8.5J ET38 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
The 2026 Dacia Duster Hybrid-G 150 4x4 (SUV) uses a 5x114.3 bolt pattern with a 66.1mm center bore. Factory wheels are 18x7.0J F/R.
Why the factory spec works for most owners:
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dacia Duster Hybrid-G 150 4x4 (2026) we drill the 5x114.3 pattern and cut the centre bore to 66.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dacia spec, or want a wheel built to a custom offset for your Dacia Duster Hybrid-G 150 4x4? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.