20 vehicle variants in our fitment database ship with 19x10 factory wheels. The most common bolt pattern on these cars is 5x120.65 (55%), and the typical factory offset is ET56 (range ET56 to ET56, 1 variants with a recorded offset). Model years covered: 2011–2027.
Bolt patterns on cars with 19x10 factory wheels
| Bolt pattern | Variants | Share |
|---|---|---|
| 5x120.65 | 11 | 55% |
| 5x112 | 6 | 30% |
| 5x120 | 2 | 10% |
| 5x114.3 | 1 | 5% |
Common flush-fit upgrade
For cars on 19x10 factory wheels, the most common flush-fit size in our database is 19x10.5J (65% of variants with a flush recommendation). Going 0.5J wider at the same offset moves the outer lip out by about 6 mm, so check fender clearance before ordering.
Vehicles with 19x10 factory wheels
Up to 40 recent models, each linked to its full fitment guide.
19x10 forged wheels made to order
Every ANKUSI wheel is forged from 6061-T6 aluminium and machined to your bolt pattern, center bore, width and offset. These designs are commonly ordered in 5x120.65.
FAQ
Which cars come with 19x10 wheels from the factory?
20 variants in our database, most often from Chevrolet, Mercedes-Benz, Cadillac, Nissan. The table above lists recent models with their bolt pattern and center bore.
What offset do 19x10 factory wheels use?
The median factory offset is ET56, but it ranges from ET56 to ET56 depending on the car, so always check the exact model.
Can ANKUSI make 19x10 forged wheels for my car?
Yes. We forge every set to order in about 25 days and machine the bolt pattern, center bore and offset to your exact vehicle, from $220 per wheel.