Matte Silver Petal Machined Face Forged Wheels
Monoblock · Matte Silver
2009 Wald Lexus IS-F Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Wald Lexus IS-F wheels? This page gives the 2009 Wald Lexus IS-F bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Wald Lexus IS-F rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2009 Wald Lexus IS-F uses a 5x114.3 bolt pattern with a 60.1 mm centre bore and M12x1.5 lug nuts. For aftermarket wheels, 20x8.5J ET35 front / 20x10J ET42 rear sits flush.
Forged wheels for the 2009 Wald Lexus IS-F — drilled 5x114.3 with a 60.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Wald Lexus IS-F (2009): 5x114.3 bolt pattern, 60.1mm center bore, OE F 19x8J ET45 / R 19x9J ET55. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore60.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2009
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x8.5J ET35 / R 20x10J ET42 |
Forged Wheel Designs for the Wald Lexus IS-F
Every design below is forged to order, so it can be machined to the Wald Lexus IS-F's 5x114.3 bolt pattern and 60.1 mm center bore, with the width and offset calculated for your setup.
Rays-Style Bronze 5 Y-Spoke Side-Milled Forged Wheels
Replica · Bronze
Vossen HF-5-Style Bronze Forged Wheels
Replica · Bronze
Gunmetal Directional Milled Forged Wheels
Monoblock · Gunmetal
BTS Polished Silver 5-Hole Forged Wheels
Replica · Polished Silver
Gloss Black Machined Wide 5-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Custom Finish
Rays-Style Gloss Black 5 Y-Spoke Deep Lip Forged Wheels
Deep Dish · Gloss Black
Vossen-Style Brushed Silver Multi-Spoke Turbine Forged Wheels
Replica · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Wald Lexus IS-F ships from the factory on a 5x114.3 bolt pattern with a 60.1mm center bore and a F 19x8J ET45 / R 19x9J ET55 wheel. Our flush reference for the Wald Lexus IS-F is F 20x8.5J ET35 / R 20x10J ET42.; our maximum aggressive reference is F 20x9J ET30 / R 20x10.5J ET38. — beyond that, expect clearance issues against the fender liner without further modification.
Wald Lexus IS-F OE Wheel Specs
The Wald Lexus IS-F ships from the factory on 5x114.3 bolt pattern wheels with a 60.1mm center bore. The stock wheel size is F 19x8J ET45 / R 19x9J ET55, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Wald Lexus IS-F (2009) we drill the 5x114.3 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET45 | 6.27 in (159 mm) | — | — |
| Flush | 20x8.5J | ET35 | 6.13 in (156 mm) | −4 mm | +16 mm |
| Maximum | 20x9J | ET30 | 6.18 in (157 mm) | −2 mm | +28 mm |
Vehicles With the Same Hub as the Wald Lexus IS-F (5x114.3, 60.1 mm Bore)
In our database, 217 other vehicle entries from 19 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 16.8% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Wald Lexus IS-F use?
The 2009 Wald Lexus IS-F uses a 5x114.3 bolt pattern.
How many lug bolts does the Wald Lexus IS-F use?
The Wald Lexus IS-F uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Wald Lexus IS-F?
The Wald Lexus IS-F's center bore is 60.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Wald Lexus IS-F?
For a flush look with minimal to no rubbing, we recommend F 20x8.5J ET35 / R 20x10J ET42 as a starting point on a stock or mildly lowered Wald Lexus IS-F.
Do I need wheel spacers for my Wald Lexus IS-F?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Wald Lexus IS-F?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" backspacing up front and 7.15" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Wald Lexus IS-F?
Yes — the Wald Lexus IS-F's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.