Toyota HiLux Bolt Pattern, Center Bore & Wheel Offset (2016–2026)
Toyota HiLux wheel fitment: 6x139.7 bolt pattern, 106.1mm center bore (2016–2026).
- 6x139.7bolt pattern (PCD)
- 106.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2016–2026
Toyota HiLux wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Toyota HiLux | 6x139.7 | 106.1 mm | 17x7.5J |
| 2026 | Toyota HiLux BEV | 6x139.7 | 106.1 mm | 17x7.5J ET30 |
| 2016 | Toyota HiLux | 6x139.7 | 106.1 mm | 17x7.5J |
Factory wheel sizes on the Toyota HiLux
Across the 3 Toyota HiLux trims with a documented factory wheel, the OE diameter is 17 inch, width 7.5J and offset ET30. A forged wheel that keeps the 6x139.7 bolt pattern and the 106.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota HiLux (6x139.7)
Shop all Toyota HiLux forged wheels →
Get a quote for Toyota HiLux wheels
Vehicles With the Same Hub as the Toyota HiLux (6x139.7, 106.1 mm Bore)
In our database, 10 other vehicle entries from 6 makes use exactly the same 6x139.7 bolt pattern and 106.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.8% of those also use a 106.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x7.5J | ET30 | 5.43 in (138 mm) | — | — |
| Flush | 18x8.5J | ET25 | 5.73 in (146 mm) | +8 mm | +18 mm |
| Maximum | 20x9J | ET20 | 5.79 in (147 mm) | +9 mm | +29 mm |
Hub-Centric Rings for a 106.1 mm Center Bore
A wheel with a center bore larger than 106.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 108.1 mm | 108.1 → 106.1 mm |
| 110.1 mm | 110.1 → 106.1 mm |
| 130.1 mm | 130.1 → 106.1 mm |
ANKUSI forged wheels are bored to exactly 106.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota HiLux?
The Toyota HiLux uses a 6x139.7 bolt pattern with a 106.1mm center bore across every HiLux variant in our database (3 guides, 2016–2026).
What is the Toyota HiLux center bore?
The hub-centric center bore is 106.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota HiLux years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Toyota HiLux?
Any wheel drilled 6x139.7 with a 106.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.