Lancia OEM-Style Gold Multi-Spoke Forged Wheels
Lancia Flavia Fitment · 5-Lug
Lancia Wheel Fitment Guide
36 fitment guides for Lancia, covering 1967 to 2025, spanning 4x98, 4x108, 4x130, 5x98, 5x108, 5x114.3, 5x115 and 5x127 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Lancia Bolt Pattern & Center Bore Notes
Based on the 36 Lancia fitment guides we cover, we have documented 9 distinct bolt pattern / center bore combinations across different Lancia platforms and model years:
- 4x98 bolt pattern, 58.1mm center bore — 24 models we cover, spanning 1974–2009.
- 5x108 bolt pattern, 58.1mm center bore — 3 models we cover, spanning 1976–2004.
- 5x98 bolt pattern, 58.1mm center bore — 3 models we cover, spanning 1992–2005.
- 4x130 bolt pattern, 75.1mm center bore — 1 model we cover, spanning 1967.
- 4x98 bolt pattern, 58.6mm center bore — 1 model we cover, spanning 1986.
- 5x115 bolt pattern, 71.5mm center bore — 1 model we cover, spanning 2012.
- 5x127 bolt pattern, 71.5mm center bore — 1 model we cover, spanning 2012.
- 5x114.3 bolt pattern, 67.1mm center bore — 1 model we cover, spanning 2013.
- 4x108 bolt pattern, 65.1mm center bore — 1 model we cover, spanning 2025.
Do not mix platforms: a wheel forged for one Lancia bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Lancia model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Lancia
The most common Lancia fitment in our guide is 4x98 with a 58.1 mm center bore (24 of 36 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 4x98 that distance is 69.3 mm (PCD × sin(180° / 4)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
4x98 / 58.1mm center bore
Beta (6)
1974 Lancia Beta Montecarlo Wheels: 4x98 Bolt Pattern & Offset1975 Lancia Beta Spider Wheels: 4x98 Bolt Pattern & Offset1975 Lancia Beta Wheels: 4x98 Bolt Pattern, Offset & Rim Size1978 Lancia Beta HPE Wheels: 4x98 Bolt Pattern & Offset1981 Lancia Beta HP Executive Wheels: 4x98 Bolt Pattern1982 Lancia Beta Trevi 2.0 VX Wheels: 4x98 Bolt Pattern
Ypsilon (6)
2003 Lancia Ypsilon 1.3 Multijet Wheels: 4x98 Bolt Pattern2004 Lancia Ypsilon BKini Wheels: 4x98 Bolt Pattern & Offset2004 Lancia Ypsilon DFN Wheels: 4x98 Bolt Pattern & Offset2005 Lancia Ypsilon MomoDesign Wheels: 4x98 Bolt Pattern2007 Lancia Ypsilon Sport MomoDesign Wheels: 4x98 Bolt Pattern2009 Lancia Ypsilon Versus Wheels: 4x98 Bolt Pattern & Offset
Delta (4)
Dedra (2)
Lybra (2)
Autobianchi (1)
5x108 / 58.1mm center bore
Thesis (2)
5x98 / 58.1mm center bore
Phedra (2)
4x130 / 75.1mm center bore
4x98 / 58.6mm center bore
5x115 / 71.5mm center bore
5x127 / 71.5mm center bore
5x114.3 / 67.1mm center bore
4x108 / 65.1mm center bore
Forged Wheels for Lancia
Forged-to-order wheel designs matched to Lancia bolt patterns. Every set is machined to your exact model, offset and center bore.
Lancia OEM-Style Gold 12-Spoke Rally Forged Wheels
Lancia Delta Integrale / Phedra Fitment · 5-Lug
Vehicles Using 4x98 With a 58.1 mm Center Bore
In our database, 30 other vehicle entries from 8 makes use exactly the same 4x98 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x98 is used by 1.1% of the vehicle pages in our English fitment guide (74 of 6,503); 73.0% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.