Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
2008 Think City Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Think City wheels? This page gives the 2008 Think City bolt pattern (4x98), centre bore, factory rim size and the offset range for aftermarket and forged Think City rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2008 Think City uses a 4x98 bolt pattern with a 58.1 mm centre bore. Factory wheels: 14x5.0J at ET35, front and rear.
Forged wheels for the 2008 Think City — drilled 4x98 with a 58.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Think City (2008): 4x98 bolt pattern, 58.1mm center bore. Factory wheels: 14x5.0J at ET35 offset, front and rear. Reference fitment ranges.
Bolt Pattern4x98
Center Bore58.1mm
Year2008
CategoryElectric City Car
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Forged Wheel Designs for the Think City
Every design below is forged to order, so it can be machined to the Think City's 4x98 bolt pattern and 58.1 mm center bore, with the width and offset calculated for your setup.
APEX-Style Bright Silver 8 Twin-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
Black / Machined 4-Spoke Forged Wheels
Monoblock · Black Machined
Alfa Romeo OEM-Style Matte Silver 5-Spoke Forged Wheels
Monoblock · Matte Silver
BBS LM-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
Rotiform-Style Gloss White 6-Spoke Forged Wheels
Monoblock · Gloss White
BBS-Style Gold Mesh Polished Lip 2-Piece Forged Wheels
2-Piece · Gold
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Think City is a low-volume, early-generation electric city car with no meaningful aftermarket offset-tuning community, so we confirm only the real factory specification below rather than inventing Flush or Maximum Aggressive ranges. Forging still delivers a genuine benefit even on a small city EV: less rotational mass at the wheel means less energy spent accelerating a heavier, battery-equipped vehicle, which protects the car's already modest factory range.
The Think City runs a 4x98 bolt pattern with a 58.1mm center bore and a 14x5.0J at ET35 offset, front and rear wheel from the factory. ANKUSI forges to this confirmed OE specification, or to a custom offset once you share your target tire size and stance — rather than publishing invented aftermarket numbers for a vehicle this low-volume.
Think City OE Wheel Specs
The 2008 Think City (Electric City Car) uses a 4x98 bolt pattern with a 58.1mm center bore. Factory wheels are 14x5.0J at ET35 offset, front and rear.
Why the factory spec works for most owners:
- Matches the vehicle's intended use case and factory-engineered load capacity
- A known, correct fitment with no clearance guesswork
- Preserves factory suspension and brake clearance
- Provides stable, predictable handling
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Think City (2008) we drill the 4x98 pattern and cut the centre bore to 58.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact vehicle from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Think City directly.
Vehicles With the Same Hub as the Think City (4x98, 58.1 mm Bore)
In our database, 53 other vehicle entries from 8 makes use exactly the same 4x98 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x98 is used by 1.1% of the vehicle pages in our English fitment guide (74 of 6,503); 73.0% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Think City use?
The 2008 Think City uses a 4x98 bolt pattern.
What is the center bore size on the Think City?
The center bore is 58.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory (stock) wheels on the Think City?
Factory wheels on the Think City are 14x5.0J at ET35 offset, front and rear.
Do I need wheel spacers for my Think City?
No. ANKUSI forges each wheel to your exact target offset, so you get the correct fitment without stacking spacers.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 14x5 wheels · 14 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.