Jeep Wagoneer Bolt Pattern, Center Bore & Wheel Offset (1963–2025)
Jeep Wagoneer wheel fitment: 6x139.7 bolt pattern, 77.8mm center bore (2022–2025); 5x127 bolt pattern, 71.5mm center bore (2024–2025). OE wheel sizes and offs
- 6x139.7bolt pattern (PCD), most common
- 77.8 mmcenter bore
- 1/2\"x20 Nutwheel bolt / nut
- 8 guidesmodel years 1963–2025
Bolt pattern by generation
- 6x139.7, 77.8 mm center bore — 2022–2025 (3 variants)
- 5x127, 71.5 mm center bore — 2024–2025 (2 variants)
- 6x139.7, 89.1 mm center bore — 1974–1978 (2 variants)
- 5x139.7, 108 mm center bore — 1963 (1 variants)
Jeep Wagoneer wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Jeep Wagoneer Overland Special Edition | 6x139.7 | 77.8 mm | 20x9J ET19 |
| 2025 | Jeep Wagoneer S Limited | 5x127 | 71.5 mm | 20x8.5J ET40 |
| 2024 | Jeep Wagoneer S | 5x127 | 71.5 mm | 20x8.5J ET40 |
| 2023 | Jeep Wagoneer L | 6x139.7 | 77.8 mm | 20x9J ET19 |
| 2022 | Jeep Wagoneer | 6x139.7 | 77.8 mm | 20x9J ET19 |
| 1978 | Jeep Wagoneer Limited | 6x139.7 | 89.1 mm | 15x7J ET12 |
| 1974 | Jeep Wagoneer | 6x139.7 | 89.1 mm | 15x7J ET12 |
| 1963 | Jeep Wagoneer | 5x139.7 | 108 mm | 15x6J ET12 |
Factory wheel sizes on the Jeep Wagoneer
Across the 8 Jeep Wagoneer trims with a documented factory wheel, the OE diameter is 15-20 inch, width 6-9J and offset ET12-40. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 28 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Jeep Wagoneer (6x139.7, 77.8 mm Bore)
In our database, 27 other vehicle entries from 4 makes use exactly the same 6x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.4% of those also use a 77.8 mm center bore.
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Jeep Wagoneer?
The Jeep Wagoneer uses a 6x139.7 bolt pattern on most variants we cover with a 77.8mm center bore. Other generations use 5x127 / 71.5mm (2024–2025), 6x139.7 / 89.1mm (1974–1978), 5x139.7 / 108mm (1963–1963). Always check the exact year and trim before ordering.
What is the Jeep Wagoneer center bore?
The hub-centric center bore is 77.8 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Jeep Wagoneer years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Jeep Wagoneer?
Any wheel drilled 6x139.7 with a 77.8mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.