Gloss Black Deep Lip Full-Face Forged Wheels
Off-Road · Gloss Black
2027 Toyota Land Cruiser FJ Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Toyota Land Cruiser FJ wheels? This page gives the 2027 Toyota Land Cruiser FJ bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Toyota Land Cruiser FJ rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2027 Toyota Land Cruiser FJ uses a 6x139.7 bolt pattern with a 106.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: 17x7.5J at ET25, front and rear. For aftermarket wheels, 17x8.5J ET15 sits flush and 18x9.0J ET10 is the most aggressive fit.
Forged wheels for the 2027 Toyota Land Cruiser FJ — drilled 6x139.7 with a 106.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Toyota Land Cruiser FJ (2027): 6x139.7 bolt pattern, 106.1mm center bore. Factory wheels: 17x7.5J at ET25 offset, front and rear. Reference fitment ranges.
Bolt Pattern6x139.7
Wheel Bolt/NutM14x1.5 Nut
Center Bore106.1mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2027
Category6-Lug Off-Road Beadlock (Off-Road SUV/Truck)
Data check: published sources disagree on part of this vehicle's hub data, and we are reviewing it. Measure your hub or ask us before ordering. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.5J at ET25 offset, front and rear |
| Flush Fitment | 17x8.5J at ET15 offset |
| Maximum Aggressive | 18x9.0J at ET10 offset |
Forged Wheel Designs for the Toyota Land Cruiser FJ
Every design below is forged to order, so it can be machined to the Toyota Land Cruiser FJ's 6x139.7 bolt pattern and 106.1 mm center bore, with the width and offset calculated for your setup.
Fuel Matte Black Exposed Bolt Detail Off-Road Forged Wheels
Off-Road · Matte Black
Gloss Black 5-Spoke Deep Lip Forged Wheels
Off-Road · Gloss Black
Gunmetal 18-Window Beadlock Forged Wheels
Off-Road Beadlock · Gunmetal
BR Wheels-Style Mirror Polished 10-Spoke Dish Off-Road Forged Wheels
Off-Road · Mirror Polished
Gray 16-Spoke Exposed Bolt Detail Forged Wheels
Off-Road · Gray
Gloss Black Forged Wheels
Off-Road Beadlock · Gloss Black
Gloss Black Machined Face Riveted Double Ring Lip Forged Wheels
Off-Road · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a truck platform, wheel weight sits right at the unsprung mass budget the suspension engineers already spent on payload and towing capacity. A forged wheel keeps that budget intact — same strength, less rotational inertia — instead of eating into the margin the way a cheap cast aftermarket wheel can.
The Toyota Land Cruiser FJ runs a 6x139.7 bolt pattern, 106.1mm center bore, and a 17x7.5J at ET25, front and rear, wheel from the factory. Our Flush Fitment reference is 17x8.5J, which tucks the tire under the fender lip on a stock-height Toyota Land Cruiser FJ. Our Maximum Aggressive reference is 18x9.0J at ET10 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Toyota Land Cruiser FJ OE Wheel Specs
The 2027 Toyota Land Cruiser FJ (Compact Off-Road SUV) uses a 6x139.7 bolt pattern with a 106.1mm center bore. Factory wheels are 17x7.5J at ET25 offset, front and rear.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Toyota Land Cruiser FJ (2027) we drill the 6x139.7 pattern and cut the centre bore to 106.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, a 17x8.5J wheel at ET15 offset (front and rear) is a commonly used starting point — clearance must be verified on a stock or mildly lowered Toyota Land Cruiser FJ.
Maximum Aggressive Fitment
18x9.0J at ET10 offset is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 17x7.5J | ET25 | 5.23 in (133 mm) | — | — |
| Maximum | 18x9J | ET10 | 5.39 in (137 mm) | +4 mm | +34 mm |
Vehicles With the Same Hub as the Toyota Land Cruiser FJ (6x139.7, 106.1 mm Bore)
In our database, 32 other vehicle entries from 7 makes use exactly the same 6x139.7 bolt pattern and 106.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.8% of those also use a 106.1 mm center bore.
Hub-Centric Rings for a 106.1 mm Center Bore
A wheel with a center bore larger than 106.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 108.1 mm | 108.1 → 106.1 mm |
| 110.1 mm | 110.1 → 106.1 mm |
| 130.1 mm | 130.1 → 106.1 mm |
ANKUSI forged wheels are bored to exactly 106.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Toyota Land Cruiser FJ use?
The 2027 Toyota Land Cruiser FJ uses a 6x139.7 bolt pattern.
How many lug bolts does the Toyota Land Cruiser FJ use?
The Toyota Land Cruiser FJ uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Toyota Land Cruiser FJ?
The Toyota Land Cruiser FJ's center bore is 106.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Toyota Land Cruiser FJ?
Factory wheels on the Toyota Land Cruiser FJ are 17x7.5J at ET25 offset, front and rear.
What is the biggest wheel size I can fit on my Toyota Land Cruiser FJ without rubbing?
The most aggressive fitment we recommend without fender work is 18x9.0J at ET10 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Toyota Land Cruiser FJ?
For a flush look with minimal to no rubbing, we recommend 17x8.5J at ET15 offset as a starting point on a stock or mildly lowered Toyota Land Cruiser FJ.
Do I need wheel spacers for my Toyota Land Cruiser FJ?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Toyota Land Cruiser FJ?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.34" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Toyota Land Cruiser FJ?
The Toyota Land Cruiser FJ runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 103-110 Nm (76-81 ft-lb). Range covers most Toyota passenger cars, crossovers, and light trucks on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 17x7.5 wheels · 17 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-25. Spotted an error? Email info@ankusi.com and we will verify and correct it.