Opel OEM-Style Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black
2007 Opel Astra Station Wagon Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Opel Astra Station Wagon wheels? This page gives the 2007 Opel Astra Station Wagon bolt pattern (5x110), centre bore, factory rim size and the offset range for aftermarket and forged Opel Astra Station Wagon rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2007 Opel Astra Station Wagon uses a 5x110 bolt pattern with a 65.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 16x6.5J ET37. For aftermarket wheels, 17x7.5J ET30 sits flush.
Forged wheels for the 2007 Opel Astra Station Wagon — drilled 5x110 with a 65.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Opel Astra Station Wagon (2007): 5x110 bolt pattern, 65.1mm center bore, OE 16x6.5J ET37. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x110
Wheel Bolt/NutM12x1.5 Nut
Center Bore65.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2007
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x6.5J ET37 |
| Flush Fitment | 17x7.5J at ET30 offset |
Forged Wheel Designs for the Opel Astra Station Wagon
Every design below is forged to order, so it can be machined to the Opel Astra Station Wagon's 5x110 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Corvette OEM-Style Polished Silver 5 Y-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Polished Silver
HRE-Style Brushed Silver Curved 5-Spoke Forged Wheels
Replica · Bright Silver
Transparent Copper Petal Forged Wheels
Monoblock · Transparent Copper
Corvette OEM-Style Custom Finish Deep Lip Forged Wheels
Monoblock · Custom Finish
Silver 5 Y-Spoke Mirror Polished Forged Wheels
Monoblock · Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A wagon carries wagon-specific weight distribution — more mass over the rear axle when loaded — so wheel strength at the rear corners matters as much as the front. Forging lets us match the factory's strength target on both ends while keeping rotational mass down, which keeps the ride composed whether the cargo area is empty or full.
The Opel Astra Station Wagon ships from the factory on a 5x110 bolt pattern with a 65.1mm center bore and a 16x6.5J ET37 wheel. Our flush reference for the Opel Astra Station Wagon is 17x7.5J ET30.; our maximum aggressive reference is 18x8J ET25. — beyond that, expect clearance issues against the fender liner without further modification.
Opel Astra Station Wagon OE Wheel Specs
The Opel Astra Station Wagon ships from the factory on 5x110 bolt pattern wheels with a 65.1mm center bore. The stock wheel size is 16x6.5J ET37, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Opel Astra Station Wagon (2007) we drill the 5x110 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x6.5J | ET37 | 5.21 in (132 mm) | — | — |
| Flush | 17x7.5J | ET30 | 5.43 in (138 mm) | +6 mm | +20 mm |
| Maximum | 18x8J | ET25 | 5.48 in (139 mm) | +7 mm | +31 mm |
Vehicles With the Same Hub as the Opel Astra Station Wagon (5x110, 65.1 mm Bore)
In our database, 139 other vehicle entries from 19 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle pages in our English fitment guide (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Opel Astra Station Wagon use?
The 2007 Opel Astra Station Wagon uses a 5x110 bolt pattern.
How many lug bolts does the Opel Astra Station Wagon use?
The Opel Astra Station Wagon uses a 5-lug bolt pattern (5x110), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Opel Astra Station Wagon?
The Opel Astra Station Wagon's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Opel Astra Station Wagon?
Factory wheels on the Opel Astra Station Wagon are 16x6.5J ET37.
What does a flush wheel fitment look like on the Opel Astra Station Wagon?
For a flush look with minimal to no rubbing, we recommend 17x7.5J at ET30 offset as a starting point on a stock or mildly lowered Opel Astra Station Wagon.
Do I need wheel spacers for my Opel Astra Station Wagon?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Opel Astra Station Wagon?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.43" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Opel Astra Station Wagon?
The Opel Astra Station Wagon runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x6.5 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.