Honda Civic / Toyota Corolla Forged Wheels
Custom Finish Mirror Polished
Honda Civic Bolt Pattern by Year, Offset & Wheel Sizes
Honda Civic bolt pattern: 4x100, 5x114.3, 5x120. The table below gives the bolt pattern, centre bore and lug nut for each model year from 1996 to 2025; further down is the full 2025 spec sheet with factory rim size and offset range for aftermarket and forged rims.
Quick answer: The 2025 Honda Civic uses a 5x114.3 bolt pattern with a 64.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 18x8.0J at ET45, front and rear. For aftermarket wheels, 18x8.5J ET40 sits flush and 19x8.5J ET35 is the most aggressive fit.
Forged wheels for the 2025 Honda Civic — drilled 5x114.3 with a 64.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Honda Civic Bolt Pattern by Year (1996–2025)
Honda Civic has used these bolt patterns: 4x100, 5x114.3, 5x120 across the model years below. Check your exact year and body style before ordering wheels, then open the full guide for center bore, factory sizes and offset.
| Model year | Version | Bolt pattern | Center bore | Lug nut / bolt | Full guide |
|---|---|---|---|---|---|
| 1996-2000 | 6th gen (EK/EJ) | 4x100 | 56.1mm | M12x1.5 Nut | Generation summary |
| 2001-2005 | 7th gen (EM2/ES) | 4x100 | 56.1mm | M12x1.5 Nut | Generation summary |
| 2002-2005 | 7th gen Si hatchback (EP3) | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2006-2011 | 8th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2012-2015 | 9th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2016-2021 | 10th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2017-2021 | 10th gen Type R (FK8) | 5x120 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2022-2024 | 11th gen | 5x114.3 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2023-2025 | 11th gen Type R (FL5) | 5x120 | 64.1mm | M12x1.5 Nut | Generation summary |
| 2025 | All body styles | 5x114.3 | 64.1mm | M12x1.5 Nut | This page |
Generation-level rows are cross-checked against two independent published wheel-specification sources. Always confirm the hub on your own car before ordering.
Honda Civic (2025): 5x114.3 bolt pattern, 64.1mm center bore. Factory wheels: 18x8.0J at ET45 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore64.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2025
CategoryCompact Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 25, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x8.0J at ET45 offset, front and rear |
| Flush Fitment | 18x8.5J at ET40 offset |
| Maximum Aggressive | 19x8.5J at ET35 offset |
Forged wheels for the Honda CivicMachined to the 5x114.3 bolt pattern and 64.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Civic's factory wheel is tuned for a balance of ride comfort and fuel economy, which means there's real room to improve both looks and steering feel without moving outside a sensible size — you don't need to go wider or lower to see a difference, just lighter. A forged wheel cuts rotational mass at the same diameter, which sharpens turn-in on a chassis that's already well regarded for handling.
The Civic uses a 5x114.3 bolt pattern, 64.1mm center bore, and an 18x8.0J ET45 wheel from the factory, front and rear. Our Flush Fitment reference is an 18x8.5J at ET40, a half-inch wider than stock that fills the fender opening on a stock or mildly lowered car. Our Maximum Aggressive reference is a 19x8.5J at ET35 — beyond that, expect rubbing under compression without fender rolling or camber correction.
Honda Civic OE Wheel Specs
The 2025 Honda Civic (Compact Sedan) uses a 5x114.3 bolt pattern with a 64.1mm center bore. Factory wheels are 18x8.0J at ET45 offset, front and rear.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Honda Civic (2025) we drill the 5x114.3 pattern and cut the centre bore to 64.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, a 18x8.5J wheel at ET40 offset (front and rear) is a commonly used starting point — clearance must be verified on a stock or mildly lowered Honda Civic.
Maximum Aggressive Fitment
19x8.5J at ET35 offset is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Factory-Style 18x8.0J ET45
Recommended setup: 18x8.0J ET45 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 18x8.5J ET43
Recommended setup: 18x8.5J ET43 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 18x8.5J ET40
Recommended setup: 18x8.5J ET40 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 19x8.5J ET38
Recommended setup: 19x8.5J ET38 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 19x8.5J ET35
Recommended setup: 19x8.5J ET35 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 18x8.0J ET45 | 18x8.5J ET43 | 18x8.5J ET40 | 19x8.5J ET38 | 19x8.5J ET35 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 18x8.0J ET45
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 18x8.5J ET40
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 19x8.5J ET35
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Honda Civic owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x8.0J ET45 → ~6.27\" backspacing
- Flush: 18x8.5J ET40 → ~6.32\" backspacing
- Max: 19x8.5J ET35 → ~6.13\" backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or can't find your exact Honda spec, or want a wheel built to a custom offset for your Honda Civic? Contact ANKUSI with your bolt pattern and offset target and we'll confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Honda Civic (2025)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x114.3 pattern and the 64.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Honda orders on this platform land somewhere between the 18x8.5J ET40 flush setup and the 19x8.5J ET35 aggressive setup referenced above.
Designs we already tool for the 5x114.3 pattern — each one is re-cut to your sizes and offsets:
Rays-Style Candy Blue 10-Spoke Forged Wheels – Honda Civic Type R / Subaru WRX Fitment (5-Lug)
Honda Civic / Accord Forged Wheels – Matte Silver Directional Milled Machined Face
Advan Racing GT-Style White 5-Spoke Forged Wheels – Toyota GR86 / Honda Civic Type R Fitment (5-Lug)
Honda OEM-Style Gloss White Custom Forged Wheels – Honda Civic / Accord Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Honda Civic use?
The 2025 Honda Civic uses a 5x114.3 bolt pattern.
How many lug bolts does the Honda Civic use?
The Honda Civic uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Honda Civic?
The Honda Civic's center bore is 64.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Honda Civic?
Factory wheels on the Honda Civic are 18x8.0J at ET45 offset, front and rear.
What is the biggest wheel size I can fit on my Honda Civic without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.5J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Honda Civic?
For a flush look with minimal to no rubbing, we recommend 18x8.5J at ET40 offset as a starting point on a stock or mildly lowered Honda Civic.
Do I need wheel spacers for my Honda Civic?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Honda Civic?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.32" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Honda Civic?
The Honda Civic runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Honda Civic (5x114.3, 64.1 mm Bore)
In our database, 36 other vehicle entries from 7 makes use exactly the same 5x114.3 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 2.8% of those also use a 64.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET45 | 6.27 in (159 mm) | — | — |
| Flush | 18x8.5J | ET40 | 6.32 in (161 mm) | +1 mm | +11 mm |
| Maximum | 19x8.5J | ET35 | 6.13 in (156 mm) | −4 mm | +16 mm |
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Honda Civic
Every design below is forged to order, so it can be machined to the Honda Civic's 5x114.3 bolt pattern and 64.1 mm center bore, with the width and offset calculated for your setup.
BBS RI-D-Style Gunmetal 5 Y-Spoke Forged Wheels - BMW M3 G80 / Honda Civic Type R Fitment (5-Lug)
BBS-Style forged wheels featuring the RI-D-style gunmetal 5 Y-spoke design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Honda OEM-Style Gloss Black Multi-Spoke Turbine Forged Wheels
Honda Civic / Accord Fitment · 5-Lug
Honda OEM-Style Chrome Web-Mesh Forged Wheels
Honda Civic / Accord Fitment · 5-Lug
BBS RE-V7-Style Silver / Gloss Black 7 Y-Spoke Forged Wheels - Toyota GR86 / Honda Civic Type R Fitment (5-Lug)
BBS-Style forged wheels featuring the RE-V7-style silver / gloss black 7 Y-spoke design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Rays-Style Chrome 6-Spoke Stepped Lip Forged Wheels
Honda Civic Type R / Subaru WRX Fitment · 5-Lug
Toyota GR86 / Honda Civic Type R Forged Wheels
Gloss White 10-Spoke
Work-Style Chrome 6-Spoke 2-Piece Deep Lip Forged Wheels
Honda Civic Type R / GR86 Fitment · 5-Lug
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-25. Spotted an error? Email info@ankusi.com and we will verify and correct it.