GMC OEM-Style Metallic Gray 10 Y-Spoke Off-Road Forged Wheels
Off-Road · Metallic Gray
2023 GMC Canyon Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting GMC Canyon wheels? This page gives the 2023 GMC Canyon bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged GMC Canyon rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 GMC Canyon uses a 6x139.7 bolt pattern with a 78.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: 18x8.5J at ET33. For aftermarket wheels, 18x9J ET18 sits flush and 20x9J ET10 is the most aggressive fit.
Forged wheels for the 2023 GMC Canyon — drilled 6x139.7 with a 78.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
GMC Canyon (2023): 6x139.7 bolt pattern, 78.1mm center bore. Factory wheels: 18x8.5J. Reference fitment ranges.
Bolt Pattern6x139.7
Wheel Bolt/NutM14x1.5 Nut
Center Bore78.1mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2023
CategoryPickup
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x8.5J at ET33 |
| Flush Fitment | 18x9J at ET18 offset |
| Maximum Aggressive | 20x9J at ET10 offset |
Forged Wheel Designs for the GMC Canyon
Every design below is forged to order, so it can be machined to the GMC Canyon's 6x139.7 bolt pattern and 78.1 mm center bore, with the width and offset calculated for your setup.
Black / Machined Split-Spoke Forged Wheels
Off-Road · Black Machined
Chrome Mesh Deep Lip Forged Wheels
Off-Road · Chrome
Mirror Polished Multi-Spoke Forged Wheels
H-Type · Mirror Polished
Vossen-Style Gloss Black Split-Spoke Off-Road Forged Wheels
Off-Road · Gloss Black
GMC OEM-Style Chrome H-Type Spoke Off-Road Forged Wheels
H-Type · Chrome
Gloss Black / Machined Directional 5-Spoke Deep Dish 2-Piece Forged Wheels
Off-Road · Gloss Black / Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Trucks live and die on unsprung weight and load capacity — every pound added at the wheel is a pound the suspension has to control over every bump, fully loaded or not. Forging the wheel instead of casting it lets us hold the factory load rating while cutting rotational mass, which pays off directly in ride quality and steering response on a vehicle that spends real time towing or hauling.
The GMC Canyon runs a 6x139.7 bolt pattern, 78.1mm center bore, and a 18x8.5J at ET33, front and rear, wheel from the factory. Our Flush Fitment reference is 18x9J ET18, which tucks the tire under the fender lip on a stock-height GMC Canyon. Our Maximum Aggressive reference is 20x9J ET10 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
GMC Canyon OE Wheel Specs
The 2023 GMC Canyon (Pickup) uses a 6x139.7 bolt pattern with a 78.1mm center bore. Factory wheels are 18x8.5J at ET33.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the GMC Canyon (2023) we drill the 6x139.7 pattern and cut the centre bore to 78.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, 18x9J ET18 is the recommended starting point on a stock or mildly lowered GMC Canyon.
Maximum Aggressive Fitment
20x9J ET10 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Real-World Fitment Notes
Chassis: Factory 2-inch ultra-wide lift (3rd gen switched to 6x139.7 PCD). Tires: 285/65 R18 all-terrain.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x8.5J ET33 → ~6.05″ backspacing
- Flush: 18x9J ET18 → ~5.71″ backspacing
- Max: 20x9J ET10 → ~5.39″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact GMC spec, or want a wheel built to a custom offset for your GMC Canyon? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
GMC Canyon: Specs by Model Year
Vehicles With the Same Hub as the GMC Canyon (6x139.7, 78.1 mm Bore)
In our database, 79 other vehicle entries from 6 makes use exactly the same 6x139.7 bolt pattern and 78.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 31.0% of those also use a 78.1 mm center bore.
Hub-Centric Rings for a 78.1 mm Center Bore
A wheel with a center bore larger than 78.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 84.1 mm | 84.1 → 78.1 mm |
| 93.1 mm | 93.1 → 78.1 mm |
| 100.1 mm | 100.1 → 78.1 mm |
| 106.1 mm | 106.1 → 78.1 mm |
ANKUSI forged wheels are bored to exactly 78.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the GMC Canyon use?
The 2023 GMC Canyon uses a 6x139.7 bolt pattern.
How many lug bolts does the GMC Canyon use?
The GMC Canyon uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the GMC Canyon?
The GMC Canyon's center bore is 78.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the GMC Canyon?
Factory wheels on the GMC Canyon are 18x8.5J at ET33.
What is the biggest wheel size I can fit on my GMC Canyon without rubbing?
The most aggressive fitment we recommend without fender work is 20x9J at ET10 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the GMC Canyon?
For a flush look with minimal to no rubbing, we recommend 18x9J at ET18 offset as a starting point on a stock or mildly lowered GMC Canyon.
Do I need wheel spacers for my GMC Canyon?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my GMC Canyon?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.71" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my GMC Canyon?
The GMC Canyon runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.