Matte Black 5-Spoke Gunmetal-Ring Beadlock Forged Wheels
Off-Road Beadlock · Matte Black / Gunmetal
2023 Jeep Grand Wagoneer L Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Jeep Grand Wagoneer L wheels? This page gives the 2023 Jeep Grand Wagoneer L bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Jeep Grand Wagoneer L rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 Jeep Grand Wagoneer L uses a 6x139.7 bolt pattern with a 77.8 mm centre bore. Factory wheels: 22x9J ET19. For aftermarket wheels, 22x10J ET10 sits flush.
Forged wheels for the 2023 Jeep Grand Wagoneer L — drilled 6x139.7 with a 77.8 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Jeep Grand Wagoneer L (2023): 6x139.7 bolt pattern, 77.8mm center bore, OE 22x9J ET19. Forged wheel fitment specs from ANKUSI.
Bolt Pattern6x139.7
Wheel Bolt/Nut1/2\"x20 Nut
Center Bore77.8mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2023
Category6-Lug Off-Road
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x9J ET19 |
| Flush Fitment | 22x10J at ET10 offset |
Forged Wheel Designs for the Jeep Grand Wagoneer L
Every design below is forged to order, so it can be machined to the Jeep Grand Wagoneer L's 6x139.7 bolt pattern and 77.8 mm center bore, with the width and offset calculated for your setup.
WK-Style Matte Black 6-Spoke Silver-Ring Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Matte Black
Matte Black H-Type Deep Lip Forged Wheels
H-Type · Matte Black
Black Bear Gloss Black Milled Lip Off-Road Forged Wheels
Off-Road · Gloss Black
Black Rhino-Style Rhino Gloss Black Double Ring Lip Off-Road Forged Wheels
Off-Road · Gloss Black
XM Off-Road XM-704 Gloss Black Mesh Faux Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Gloss Black
ZUK-Style Matte Black 10-Spoke Orange-Ring Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Matte Black / Orange
Brox-Style Mirror Polished 15-Spoke Off-Road Forged Wheels
Off-Road · Mirror Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A wagon carries wagon-specific weight distribution — more mass over the rear axle when loaded — so wheel strength at the rear corners matters as much as the front. Forging lets us match the factory's strength target on both ends while keeping rotational mass down, which keeps the ride composed whether the cargo area is empty or full.
The Jeep Grand Wagoneer L ships from the factory on a 6x139.7 bolt pattern with a 77.8mm center bore and a 22x9J ET19 wheel. Our flush reference for the Jeep Grand Wagoneer L is 22x10J ET10.; our maximum aggressive reference is 24x10.5J ET0. — beyond that, expect clearance issues against the fender liner without further modification.
Jeep Grand Wagoneer L OE Wheel Specs
The Jeep Grand Wagoneer L ships from the factory on 6x139.7 bolt pattern wheels with a 77.8mm center bore. The stock wheel size is 22x9J ET19, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Jeep Grand Wagoneer L (2023) we drill the 6x139.7 pattern and cut the centre bore to 77.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 22x9J | ET19 | 5.75 in (146 mm) | — | — |
| Flush | 22x10J | ET10 | 5.89 in (150 mm) | +4 mm | +22 mm |
| Maximum | 24x10.5J | ET0 | 5.75 in (146 mm) | 0 mm | +38 mm |
Vehicles With the Same Hub as the Jeep Grand Wagoneer L (6x139.7, 77.8 mm Bore)
In our database, 31 other vehicle entries from 5 makes use exactly the same 6x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.4% of those also use a 77.8 mm center bore.
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Jeep Grand Wagoneer L use?
The 2023 Jeep Grand Wagoneer L uses a 6x139.7 bolt pattern.
How many lug bolts does the Jeep Grand Wagoneer L use?
The Jeep Grand Wagoneer L uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Jeep Grand Wagoneer L?
The Jeep Grand Wagoneer L's center bore is 77.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Jeep Grand Wagoneer L?
Factory wheels on the Jeep Grand Wagoneer L are 22x9J ET19.
What does a flush wheel fitment look like on the Jeep Grand Wagoneer L?
For a flush look with minimal to no rubbing, we recommend 22x10J at ET10 offset as a starting point on a stock or mildly lowered Jeep Grand Wagoneer L.
Do I need wheel spacers for my Jeep Grand Wagoneer L?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Jeep Grand Wagoneer L?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.89" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Jeep Grand Wagoneer L?
The Jeep Grand Wagoneer L runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x9 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.