Ram OEM-Style Matte Black Off-Road Forged Wheels
Off-Road · Matte Black
2025 Ram 1500 RHO Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ram 1500 RHO wheels? This page gives the 2025 Ram 1500 RHO bolt pattern (6x139.7), centre bore, factory rim size and the offset range for aftermarket and forged Ram 1500 RHO rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Ram 1500 RHO uses a 6x139.7 bolt pattern with a 77.8 mm centre bore and M14x1.5 lug nuts. Factory wheels: 18x9.0J ET19, front and rear. For aftermarket wheels, 18x9.0J ET0 sits flush and 20x10.0J ET-18 is the most aggressive fit.
Forged wheels for the 2025 Ram 1500 RHO — drilled 6x139.7 with a 77.8 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Ram 1500 RHO (2025): 6x139.7 bolt pattern, 77.8mm center bore. Factory wheels: 18x9.0J at ET19 offset, front and rear. Reference fitment ranges.
Bolt Pattern6x139.7
Wheel Bolt/NutM14x1.5 Nut
Center Bore77.8mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2025
CategoryPerformance Truck
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x9.0J F/R |
| Flush Fitment | 18x9.0J at ET0 offset |
| Maximum Aggressive | 20x10.0J at ET-18 offset |
Forged Wheel Designs for the Ram 1500 RHO
Every design below is forged to order, so it can be machined to the Ram 1500 RHO's 6x139.7 bolt pattern and 77.8 mm center bore, with the width and offset calculated for your setup.
Ram OEM-Style Gloss Black Machined Face Directional Off-Road Forged Wheels
Off-Road · Gloss Black
Ram OEM-Style Gloss Black Petal Off-Road Forged Wheels
Off-Road · Gloss Black
Vossen 6 Y-Spoke Gloss Black Off-Road Forged Wheels
Off-Road · Gloss Black
Gloss Black 10 Split-Spoke Forged Wheels
Off-Road · Gloss Black
Ram OEM-Style Gloss Black 6-Spoke Riveted Off-Road Forged Wheels
Off-Road · Gloss Black
Vossen HF-7-Style Metallic Gray 6-Lug Off-Road Forged Wheels
Off-Road · Metallic Gray
Ram OEM-Style Gloss Black Split-Spoke Off-Road Forged Wheels
Off-Road · Gloss Black
See all Ram 1500 wheel designs American Force-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Trucks live and die on unsprung weight and load capacity — every pound added at the wheel is a pound the suspension has to control over every bump, fully loaded or not. Forging the wheel instead of casting it lets us hold the factory load rating while cutting rotational mass, which pays off directly in ride quality and steering response on a vehicle that spends real time towing or hauling.
The Ram 1500 RHO runs a 6x139.7 bolt pattern, 77.8mm center bore, and a 18x9.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x9.0J ET0, which tucks the tire under the fender lip on a stock-height Ram 1500 RHO. Our Maximum Aggressive reference is 20x10.0J ET-18 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Ram 1500 RHO OE Wheel Specs
The 2025 Ram 1500 RHO (Performance Truck) uses a 6x139.7 bolt pattern with a 77.8mm center bore. Factory wheels are 18x9.0J F/R.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ram 1500 RHO (2025) we drill the 6x139.7 pattern and cut the centre bore to 77.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Ram spec, or want a wheel built to a custom offset for your Ram 1500 RHO? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x9J | ET19 | 5.75 in (146 mm) | — | — |
| Flush | 18x9J | ET0 | 5.00 in (127 mm) | −19 mm | +19 mm |
| Maximum | 20x10J | ET-18 | 4.79 in (122 mm) | −24 mm | +50 mm |
Vehicles With the Same Hub as the Ram 1500 RHO (6x139.7, 77.8 mm Bore)
In our database, 31 other vehicle entries from 5 makes use exactly the same 6x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.4% of those also use a 77.8 mm center bore.
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Ram 1500 RHO use?
The 2025 Ram 1500 RHO uses a 6x139.7 bolt pattern.
How many lug bolts does the Ram 1500 RHO use?
The Ram 1500 RHO uses a 6-lug bolt pattern (6x139.7), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Ram 1500 RHO?
The Ram 1500 RHO's center bore is 77.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ram 1500 RHO?
Factory wheels on the Ram 1500 RHO are 18x9.0J F/R.
What is the biggest wheel size I can fit on my Ram 1500 RHO without rubbing?
The most aggressive fitment we recommend without fender work is 20x10.0J at ET-18 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Ram 1500 RHO?
For a flush look with minimal to no rubbing, we recommend 18x9.0J at ET0 offset as a starting point on a stock or mildly lowered Ram 1500 RHO.
Do I need wheel spacers for my Ram 1500 RHO?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ram 1500 RHO?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ram 1500 RHO?
The Ram 1500 RHO runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x9 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.