Jeep Grand Wagoneer Bolt Pattern, Center Bore & Wheel Offset (2023–2026)
Jeep Grand Wagoneer wheel fitment: 6x139.7 bolt pattern, 77.8mm center bore (2023–2026). OE wheel sizes and offsets for every Grand Wagoneer variant we cover
- 6x139.7bolt pattern (PCD)
- 77.8 mmcenter bore
- 1/2\"x20 Nutwheel bolt / nut
- 2 guidesmodel years 2023–2026
Jeep Grand Wagoneer wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Jeep Grand Wagoneer | 6x139.7 | 77.8 mm | 22x9J ET19 |
| 2023 | Jeep Grand Wagoneer L | 6x139.7 | 77.8 mm | 22x9J ET19 |
Factory wheel sizes on the Jeep Grand Wagoneer
Across the 2 Jeep Grand Wagoneer trims with a documented factory wheel, the OE diameter is 22 inch, width 9J and offset ET19. A forged wheel that keeps the 6x139.7 bolt pattern and the 77.8 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Jeep Grand Wagoneer (6x139.7, 77.8 mm Bore)
In our database, 27 other vehicle entries from 4 makes use exactly the same 6x139.7 bolt pattern and 77.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 12.4% of those also use a 77.8 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 22x9J | ET19 | 5.75 in (146 mm) | — | — |
| Flush | 22x10J | ET10 | 5.89 in (150 mm) | +4 mm | +22 mm |
| Maximum | 24x10.5J | ET0 | 5.75 in (146 mm) | 0 mm | +38 mm |
Hub-Centric Rings for a 77.8 mm Center Bore
A wheel with a center bore larger than 77.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 78.1 mm | 78.1 → 77.8 mm |
| 84.1 mm | 84.1 → 77.8 mm |
| 93.1 mm | 93.1 → 77.8 mm |
| 100.1 mm | 100.1 → 77.8 mm |
ANKUSI forged wheels are bored to exactly 77.8 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Jeep Grand Wagoneer?
The Jeep Grand Wagoneer uses a 6x139.7 bolt pattern with a 77.8mm center bore across every Grand Wagoneer variant in our database (2 guides, 2023–2026).
What is the Jeep Grand Wagoneer center bore?
The hub-centric center bore is 77.8 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Jeep Grand Wagoneer years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Jeep Grand Wagoneer?
Any wheel drilled 6x139.7 with a 77.8mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.