Pontiac Solstice Bolt Pattern, Center Bore & Wheel Offset (2006–2010)
Pontiac Solstice wheel fitment: 5x110 bolt pattern, 65.1mm center bore (2006–2010). OE wheel sizes and offsets for every Solstice variant we cover (2 guides),
- 5x110bolt pattern (PCD)
- 65.1 mmcenter bore
- Nutwheel bolt / nut
- 2 guidesmodel years 2006–2010
Pontiac Solstice wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2010 | Pontiac Solstice | 5x110 | 65.1 mm | 18x8J |
| 2006 | Pontiac Solstice | 5x110 | 65.1 mm | 18x8J |
Factory wheel sizes on the Pontiac Solstice
Across the 2 Pontiac Solstice trims with a documented factory wheel, the OE diameter is 18 inch, width 8J. A forged wheel that keeps the 5x110 bolt pattern and the 65.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Pontiac Solstice (5x110)
Get a quote for Pontiac Solstice wheels
Vehicles With the Same Hub as the Pontiac Solstice (5x110, 65.1 mm Bore)
In our database, 134 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.1% of the vehicle entries in our database (136 of 6,396); 100.0% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Pontiac Solstice?
The Pontiac Solstice uses a 5x110 bolt pattern with a 65.1mm center bore across every Solstice variant in our database (2 guides, 2006–2010).
What is the Pontiac Solstice center bore?
The hub-centric center bore is 65.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Pontiac Solstice years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Pontiac Solstice?
Any wheel drilled 5x110 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.